Sunbeam KE5300 manual Preparing the filter cartridge for use, Removing the filter cartridge

Preparing the filter cartridge for use

1.Remove the cartridge from its wrapping (it is normal for the cartridge to appear moist during storage).

2.Immerse the cartridge in cold water and agitate gently to remove any air bubbles. See figure 1.

4.Fill the filter funnel with cold water and allow it to filter through, and then discard the water. Repeat this process, again discarding the water. See figure 3.

Figure 1

Note: There is no need to presoak this cartridge before use.

3.Insert the cartridge into the filter funnel assembly and push it firmly into place. When correctly fitted, the cartridge should remain in place when the funnel is turned upside-down. See figure 2.

Figure 3

5.Refill the filter funnel with water, the filter is now ready for use. See figure 3.

Note: You do not need to keep the filter cartridge immersed in water.

Removing the filter cartridge

•When it is time to replace the cartridge after 8 weeks use, simply lift the handle on top of the cartridge to remove. See figure 4. The cartridge may be disposed of in household waste or contact the BRITA Care Team for advice on recycling schemes.

Figure 4

Figure 2	•	Always ensure that you have spare
		cartridges available.
	•	Repeat steps 1-5 with a new cartridge.

10