Using for the first time

•The appliance must be fully charged before using for the first time.

•To reach the optimum recharge capacity, the batteries should be charged for 8.5 hours. Do not charge for longer than this time.

•Ensure that the Beard Trimmer & Shaper is switched off by pushing down the on / off switch.

•Insert the charger lead into the charging stand and place the Beard Trimmer & Shaper firmly into the slot location

•Plug the adaptor into a suitable mains outlet and switch on.

•The red light on the appliance will light up and will switch to green when charging is completed.

•The Beard Trimmer & Shaper will work for approximately 35 minutes on full charge.

•Recharging after each use is not needed if the 35 minute working period has not been fully used.

•It is not possible to use this appliance when the adaptor is plugged into the mains.

Note: Do not charge for longer than the recommended time of 8.5 hours.

Using the nose & ear hair trimmer

• Attach the nose hair trimmer attachment by placing on the

8unit and turning clockwise until it clicks into place.