Sunbeam PB7950 Using your MultiBlender Electronic, Place the blender jug onto the motor base

Using your MultiBlender Electronic

1.Place the blender jug onto the motor base.

Note: Do not switch ‘ON’ the MultiBlender Electronic without the lid in position.

2.Place ingredients into the glass jug. Do not exceed the maximum indicated level

– 1.6 litres.

3.Position the lid with ingredient cup onto the blender jug. Ensure the lid is firmly in place.

4.Using the control panel, select the desired function, either from the pre-programmed functions or the manual buttons High, Low and PULSE settings.

The Blending Guide on page 6 shows various functions that can be performed and the suggested speeds to use.

Note: Although the lid fits firmly to the glass jug, we advise when blending liquid ingredients, to place your hand on the lid as you initially select the blending speed/ function. As the powerful 850 watt motor could cause the liquid to surge up causing leakage. Once you have started blending you can remove your hand.

Further ingredients can also be added

while blending by removing the ingredient cup and pouring ingredients through the hole in the lid.

Note: The pre-programmed functions can be stopped by simply pressing the ‘OFF’ button.

5.If using the manual buttons, Low or High, once you have completed blending, press the ‘OFF’ button on the control panel.

Note: When removing the six-blade assembly from the glass jug you may need to slightly tilt the blade so that it slides out easily. You shouldn’t force the blades out of the glass jug as this will ultimately damage the blades.

5