Sunbeam SBH-200 Operating Instructions, Changing & Cleaning The Dust Cup Filter, ¾TO OPERATE

Models: SBH-200

1 8
Download 8 pages 55.21 Kb
Page 6
Image 6
OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

¾TO OPERATE

Hold the handvac firmly with your hand on the Handle (4).

¾TURNING VACUUM ON

Push the I/O Power Switch (3) to “I” position.

CAUTION

The Hand Vacuum is a very powerful machine. Make sure that you hold it firmly; otherwise it can slip out of your grasp and cause injury.

CHANGING & CLEANING THE DUST CUP FILTER

Warning: Always unplug from electrical outlet before opening the Dust Cup (5).

Reminder: It is better to wash the filter after using handvac.

1.To open the Dust Cup (5), push Dust Cup Release Button (2) and pull out the Dust Cup (5) (fig. 1).

2.Pull out the Dust Cup Filter (6) (fig. 2).

3.Empty the dust from the Dust Cup Filter (6).

4.Rinse the Dust Cup Filter (6) in cold water, and then wait until it completely dries before replacing it into the Dust Cup (5) (fig. 3).

5.Place the Dust Cup Filter (6) carefully into the Dust Cup (5) (fig. 4).

6.Attach the Dust Cup (5) to the handvac.

fig.1

fig.2

fig.3

fig.4

- 6 -

Page 6
Image 6
Sunbeam SBH-200 manual Operating Instructions, Changing & Cleaning The Dust Cup Filter, ¾TO OPERATE, ¾TURNING VACUUM ON