Using the chopper attachment
(Model SM7400)
1. Place the chopper bowl on the non-slip
mat, ensuring the surface is clean and
level.
2. Fit the stainless steel chopping blade into
the chopper bowl.
Note: Care shall be taken when handling
sharp cutting blades.
3. Place food into the chopper bowl.
4. Attach the lid onto the chopper bowl and
rotate the lid in a clockwise direction until
it locks into position.
5. Insert the motor housing into the hole on
the top of the chopper attachment and turn
in a clockwise direction until it locks into
position. See Figure 3.
6. Plug the power cord into a 230-240 volt
power outlet and turn the power on.
7. Hold the bowl with one hand while
operating the power button with the other.
Setting ( ) is low speed and setting
() is high speed.
Note: All stick mixers are designed to
operate only whilst the power buttons remain
depressed.
Note: The power button ( ) should be
released when selecting the turbo speed
button ( ).
8. To stop the StickMaster®, take your finger
off the power button ( ) or turbo speed
button ( ).
9. To detach the chopper attachment, twist
the motor housing in an anti-clockwise
direction until the two pieces separate.
See Figure 4.
Note: Care shall be taken when handling
sharp cutting blades, emptying the bowl and
during cleaning.
Using your StickMaster® continued
Figure 3
Figure 4
7