18.Use only thermometers, which are specifically designed for use in microwave ovens.
19.Do not operate any heating or cooking appliance beneath this appliance.
20.Be certain the glass tray and roller rings are in place when you operate the oven.
21.This appliance should be serviced only by
qualified service personnel, contact nearest authorized service facility for examination, repair, or adjustment.
22.When cleaning surfaces of door and oven that comes together on closing the door, use only mild, nonabrasive soaps, or detergents applied with a sponge or soft clot
INSTALLATION GUIDE 
1.Make sure that all the packing materials are removed from the inside of the door.
2.Check the oven for any damage, such as misaligned or bent door, damaged door seals and sealing surface, broken or loose door hinges and latches and dents inside the cavity or on the door. If there is any damage, do not operate the oven but contact qualified service personnel.
3.This microwave oven must be placed on a flat, stable surface to hold its weight and the heaviest food likely to be cooked in the oven.
4.Do not place the oven where heat, moisture, or high humidity are generated, or near combustible materials.
5.For correct operation, the oven must have sufficient airflow. Allow 20cm of space above the oven, 10cm at back and 5cm at both sides. Do not cover or block any openings on the appliance. Do not remove feet on which oven stands.
6.Do not operate the oven without glass tray, roller support, and shaft in their proper positions.
7.Make sure that the power supply cord is undamaged and does not run under the oven or over any hot or sharp surface.
8.The socket must be readily accessible so that it can be easily unplugged in an emergency.
GROUNDING INSTRUCTIONS 
This appliance must be grounded. In the event of an electrical short circuit, grounding reduces risk of electric shock by providing an escape wire for the electric current.
WARNING Improper use of the grounding plug can result in a risk of electric shock.
ELECTRICAL REQUIREMENTS
The electrical requirements are a 120 volt 60
Hz, AC only, 20 amp. It is recommended that a separate circuit serving only the oven be provided. The oven is equipped with a
Power Supply Cord
1.A short power supply cord is provided to reduce the risks resulting from becoming
SAVE THESE INSTRUCTIONS
3
