Sunbeam SR8500 Using your professional ironing system continued

5
5.Press and hold the steam release button to
iron with steam. To dry iron, do not press
the steam release button. Both the steam
ready indicator and the thermostat light
will cycle on and off during ironing as the
ironing system maintains the selected
steam pressure and temperature levels.
Note: To prevent water dripping from the
soleplate, only use the steam function on
higher temperature settings (•• and above).
6.Once you have finished ironing, switch the
iron and boiler off by moving both switches
to the off position. Switch the power off at
the power outlet and remove the plug. Wait
for the iron to cool completely before
storing. Do NOT empty the water tank.
Refilling the tank during ironing
When the water in the tank falls below the
minimum level, the red low water indicator
will illuminate, and the iron will stop
generating steam.
1.Before refilling the tank, switch the boiler
and iron switches to the off position.
Switch the power off at the power outlet
and remove the plug.
2.Lift the water cover and fill the tank.
Replace the cover.
3.Insert the plug into the power outlet and
turn the power on.
4.Place the boiler and iron power switches in
the on position, and allow the appliance to
heat.
5.Recommence ironing when the thermostat
light goes out and the green steam ready
indicator is illuminated.
Using your professional ironing system continued