Sunbeam WF6100 manual Filtering time, Using the Memo function

Using your Water Filter & Chiller (continued)

Filtering time

Please note that on average it will take 5½ minutes to filter 1 litre of water through the BRITA® MAXTRA cartridge.

Using the Memo function

It is important to change your filter cartridge regularly to enjoy the benefits of filtered water.

The BRITA® Memo system automatically reminds you when your filter cartridge needs to be changed. It is automatically calibrated according to average use of one litre of water per day and will remind you to change your filter every 8 weeks. If you are a heavier user than one litre per day you will need to change your filter more often according to your usage rate. A filter will effectively filter 150 litres of water before needing replacement.

Once you have fitted and prepared your filter cartridge as outlined on page 5, start the Memo system as follows:

•Press and hold the Start button until 4 bars appear on the display and flash twice. The Memo is now set. The flashing dot in the corner of the display indicates that the Memo is working. (See figure 3).

Note: Repeat the cartridge preparation process each time you insert a new cartridge.

•At the end of every two weeks, one bar will disappear to indicate the remaining cartridge life. When only one bar is showing, ensure that you have a replacement BRITA® MAXTRA water filter cartridge available.

(See figure 4).

%

100

75

50

25

Figure 4

•After 8 weeks, all four bars will disappear and a flashing arrow will appear to indicate that the cartridge should be replaced. (See figure 5).

%

100

75

50

25

%

100

75

50

25

Figure 3

Figure 5

Wash and dry the filter funnel, insert a new cartridge (see 'Preparing the filter cartridge for use') and restart the BRITA® Memo as described above.

Note: The Memo system is only intended to be used with BRITA® filter cartridges.

6