Troubleshooting The unit is leaking The filter or water tank are not Remove the water tank and filter. Remove the
fitted correctly. clear rubber o-rings from the base of the unit and
fit back onto the filter cartridge. Wet the o-ring
seals and snap the filter back into place. With
a clean cloth, dry the seal on the unit, place
the water tank on the base and press down firmly.
No water The filter or water Follow instructions above.
is dispensed tank are not fitted correctly.
The filter may be Replace the filter.
blocked.
LED display light Contact Sunbeam Customer Service Help Line.
is not working
Note: The ready light for chilled water may flicker
on and off as chilled water is dispensed and if
ambient temperature increases.
Problem Possible cause What to do
12
Help Line