Using your heater (continued)
MF1500 Micro Furnace Ceramic Disc Heater
1.Place the heater on a flat level surface, approximately 1 metre from any wall or other objects such as furniture, curtains, plants or combustible material, and ensure that the air intake and outlet are clear of obstructions.
Note: For most efficient heating, place the heater on the floor where the air is cooler, near an outside door, the bottom of a staircase, or where colder air is most likely to be entering the room.
2.Insert the plug into a
3.To operate the heater, select HEAT on the mode dial. Rotate the thermostat dial to select the desired temperature setting. Once the selected temperature level has been reached, the thermostat will constantly vary the heat output to maintain it.
4.To operate the fan, select FAN on the mode dial. Rotate the thermosat dial to minimum.
5.To switch the heater off, select OFF on the mode dial.
6.Switch the power off at the power outlet and unplug the heater when not in use.
Care and cleaning
Ensure the heater is switched off and disconnected from the power outlet before cleaning.
Carefully wipe the exterior of the heater with a soft damp cloth and dry thoroughly.
Cleaning the dust filter
The dust filter collects dirt and dust from the air circulating through the heater.
To clean the filter, remove from the unit and rinse under warm water. Allow to dry completely before replacing on the heater.
Storage
Store your heater in a cool dry place when not in use. Store the heater in its carton if possible.
9
