11.4 Pillow Care
Remove and clean the headrest pillows as needed with soapy water using a
cloth or soft-bristle brush. To maintain water resistance and luster, apply a
quality vinyl conditioner once a month. Always remove the pillows when
adding chemical shock treatment to the hot tub water. The pillows can be
returned to the hot tub when the sanitizer reading drops below 5 ppm.
IMPORTANT: Never attempt to remove the pillows by pulling on them!
The pillows utilize a bolt-on design that prohibits removal without tools.
To remove pillows:
1. Grasp center pillow insert (A) with finger
tips and gently pry outward from pillow
base (C).
2. Use a standard screwdriver to loosen
and remove mounting bolts (B) from
pillow base.
3. Assemble in reverse order after cleaning.
DO NOT overtighten pillow mounting
bolts!
11.5 Maintaining The Wood Cabinet
With time and exposure to the elements, the wood on your hot tub will
tend to lose its new appearance. Protecting or reviving the wood surfaces is
a fairly simple process. Light sanding with fine-grit sandpaper will help
smooth any roughness and regular applications of a penetrating wood
preservative will enhance and protect the richness of the wood. A specially
formulated wood stain available from your Sundance dealer is ideal for this.
NOTE: Do not apply varnish, shellac or other surface sealants to the
wood. These tend to react with the chemicals in the wood and the UV
rays of the sun, causing yellowing, flaking and peeling.
11.6 Maintaining The Optional Synthetic Cabinet
The optional synthetic cabinet requires little or no maintenance of any kind.
To clean, simply wipe cabinet with a clean towel and mild detergent soap
solution.
CAUTION: Never spray cabinet with a garden hose for any reason since
this action may induce an electrical short in the spa’s electrical equipment.
Page 31
ENGLISH