Specifications
Amplifier Output
1,500 Watts rms (4.6 Ω impedance)
High Cut Filter
30 Hz - 100 Hz adjustable. The crossover can be bypassed by rotating the crossover frequency control fully clockwise.
Frequency Response
22 Hz - 100 Hz
Power Line Voltage
AC 120 V/60 Hz
Dimensions
9" x 9" x 9"
Weight
29 lbs
Finish
Black anodized control plate, and dark rosewood lacquer cabinet.
Line Power Consumption:
300 W average, 22 Hz to 100 Hz, at absolute maximum continuous output.
1200 W peak, time limited basis
Output Levels:
Greater than 108 dB peak SPL (includes room gain) from 25 Hz to 90 Hz
A typical Sunfire subwoofer can be expected to ‘best’ its specified minimum peak SPL by several decibels.
Input Sensitivity for Full Output:
240 mVrms from left input with volume control at 0 dB, 90 mVrms with volume control fully clockwise*
0.48Vrms from right input with volume control at 0 dB, 180 mVrms with volume control fully clockwise*
Input Impedance:
30 KΩ for
5.6 KΩ for
Driver:
Extra large magnet and long throw mechanical design yield very high
Internal System Gain:
42 dB from left input jack to speaker with the Bass Level control at 0 dB, 54 dB with the control fully clockwise*
36 dB from right input jack to speaker with the Bass Level control at 0 dB,
48 dB with the control fully clockwise*
*The Sunfire True Subwoofer utilizes differential gain on the left and right inputs to retain both L+R and
© 2006 Sunfire Corporation.
All rights reserved. Sunfire Corporation reserves the right to improve its products at any time. Therefore, specifications are subject to change without notice.
Manual part number
16 5SERgS