Auto-Off
Time
Decrease Increase
TimeTime
The amplifier will automatically turn to standby mode if no audio is present for an amount of time set using this menu.
The amplifier will turn back on whenever an audio signal is present again. The available time settings are 5, 10, 15, 20, 25, and 30 minutes, and "Disabled." If "Disabled" is selected, then the amplifier will not turn itself off.
SUB/LFE Mode
SUB or LFE
Select
In SUB Mode, the Crossover Slope and Crossover Frequency can be adjusted, and so these menus are available.
In LFE mode, the Crossover Slope and Crossover Frequency cannot be ad- justed, and so these menus are hidden. The crossover adjustment is then left to the Home Theater preamplifier.
The amplifier will automatically turn on from standby if a trigger voltage is applied to the 12VDC trigger input on the rear panel. This menu allows you to turn this feature on or off.
ON or OFF
Select
Lock Setting
This menu allows you to lock the DSP settings so that they cannot be altered.
If lock is enabled then no settings can be changed until lock is disabled.
Disable or
Enable
Select
User's Manual 
15
