®
Satellite Loudspeaker Stand Kit
Introduction
Thank you for purchasing this Sunfire loudspeaker stand. It has been designed as a perfect match for the CRM-2 satellite loudspeakers – following the cabinet's taper and producing an elegant, one-piece look. A high-gloss lacquered base and column ensures that form meets function. This guide shows you how to assemble the stand and mount the CRM-2. Please read the CRM-2 User's Manual for further details of these loudspeakers, including location, operation and features. Please note that the CRM-2 is sold separately.
Assembly overview
The column is attached to the base using four Allen screws supplied. The CRM-2 loudspeaker has an adapter plate that lines up with a keyhole bracket in the column, and the loudspeaker is held in place by two locking screws. Speaker wires are neatly hidden within the column and exit from the base. Four rubber screw-on feet are supplied to fit on the base.
Contents of each stand kit
•Base
•Column
•Speaker Adapter Plate
•4 Allen screws for attaching the column to the base
•1 Allen screw for attaching your CRM-2 satellite loud- speaker to the speaker adapter plate
•2 Allen screws for attaching the speaker adapter plate to the column
•Allen wrench
•4 screw-on spikes, 4 screw-on rubber feet, with wrench
CRM-2
Unpacking
Your stand kit should reach you in perfect condi- tion. If you do notice any shipping damage, please contact Sunfire immediately. Make sure that
you keep your sales receipt. It is the only way to establish the duration of your Limited Warranty.
Column
Base
1
Assembly Guide