Turntable Connections

CHAPTER 2

Ground wire

From: Turntable chassis ground

To: PreampliÞer chassis ground connector

Phono-level audio signals

From: Turntable L/R audio outputs

To: PreampliÞer Phono L/R audio inputs

Only connect a Turntable to the PHONO input. In most cases, you should also connect the ground wire to reduce any hum through your speakers.

The Phono input is designed for Moving Magnet (MM) cartridges and Moving Coil

(MC) cartridges. To avoid overload, DO NOT connect CD players or other line-level sources to this input.

Set the Phono selector switch to either MM or MC depending on the type of cartridge you have. Do this before you turn on the preampliÞer.

If you have a low output Moving Coil cartridge, set the switch to MC. If you have a high output Moving Magnet cartridge, set it to MM. If you are not sure which type of cartridge you have, try MM Þrst, and do a listening test. If the noise level is high, try setting the switch to MC.

User's Manual

9