X . S E T U P & A D J U S T M E N T
A. SET-UP
1. Fasteners
Use of improper fasteners may cause the chair to fail. Over or
a.Many of the screws and bolts on this chair are special
b.Many nuts are the Nylock type.They have a plastic insert to help prevent loosening.
c.ONLY use screws, bolts and nuts provided by an authorized supplier (or fasteners of the same type and strength, as indicated by the markings on the heads).
2.Washers & Spacers
a.Make a note of the position of washers and spacers before disassembly.
b.To avoid damage to the frame, position washers and spacers correctly when you reassemble parts.
Note on Torque Settings: A torque setting is the optimum tightening which should be made on a particular fastener. A torque wrench which measures
use a torque setting of
B. TOOLS
1.Basic Tool Kit
To set up, adjust and maintain your chair, you will need the following tools:
a.3/4" box and
b.5/8" box and
c.1/2" box and
d.7/16" box and
e.Socket wrench
f.3/16" Allen wrench
g.Phillips head screwdriver #2
h.Torque wrench
i.3/4", 5/8", 1/2", 7/16" Sockets
2.Torque Wrench
If you plan to adjust and maintain this chair yourself, Sunrise recommends that you use a torque wrench.
X . S E T U P & A D J U S T M E N T
When properly set up, your chair will roll smoothly and easily. All components should also work smoothly. If you detect a problem, be sure to correct it before using this chair.
C.TO FIND & CORRECT A PROBLEM
1.Review the TROUBLESHOOTING section to see if your chair has one of the listed symptoms. If so, follow steps to solve the problem.
2.Follow steps in this section to make sure set up is correct.
3.If steps 1 and 2 do not work, consult your authorized supplier for help.
4.If you still have a problem, contact customer service at 800.333.4000.
26 | 27 |
