26 | E n g l i s h |
|
I X . O p e r a t i n g G u i d e 
F. MOTOR LOCKS
Disconnect the motor locks when you need to manually push the chair. (For example, in an emergency, or if batteries fail).
1.Do not disengage motor locks unless power to the chair is off.
2.With either one or both brakes released, the chair will not operate and the battery charge indicator will flash 9 bars rapidly (if power to the chair is on.)
3.Be aware that the chair will not have brakes in the
4.Make sure that the person pushing the chair has full control when motor locks are disengaged.
1.Release Motor Locks
a.The motor release levers (A) are attached to the rear section of the motors located at the back of the chair.
b.Push the release levers inward toward the center of the chair.
2.Engage Motor Locks
a.The motor release levers (A) are attached to the rear section of the motors located at the back of the chair.
b.Push the motor release levers out, away from the center of the chair.
A
932108 Rev. C
