NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
14
ACCESSORY COMPONENTS (CONTINUED)

Interior Brick Liner Kits

The brickade liner kits include tan stamped sheetmetal panels for the rear and side walls of the firebox. The
panels have brick-like features in relief. These kits can be retrofitted into previously installed appliances.

Polished Brass & Brushed Stainless Hood Kits

Attractive hoods are available in two styles. These hoods are designed to be fitted to the glass viewing side of
the appliance. In addition to providing an aesthetically pleasing appearance to your appliance installation, the
hood reduces heat effects to decorative mantles and finish materials located above the fireplace opening. The
hood kit replaces the standard hood that comes with these appliances and snaps into place. These kits can
be retrofitted to previously installed appliances.
(ref. Form #504,142M)
Eyebrow Hood Kits
Polished Brass Brushed Stainless Models
Where Used
Cat. # Model Cat. # Model
80L52 HK-5/50B 80L60 HK-5/50BS SSBV-3530
80L53 HK-6/60B 80L61 HK-6/60BS SSBV-4035
* These hood kits replace the standard hood that comes with
these fireplaces.
* Assembled 8-Piece Louver Kits
Polished Brass Brushed Stainless Models
Where Used
Cat. # Model Cat. # Model
H1524 LK-500B H1525 LK-500BS SSBV-3530
H1526 LK-600B H1527 LK-600BS SSBV-4035

Polished Brass & Brushed Stainless Louvers Kits

These kits include a top 4-louver assembly and a bottom 4-louver assembly. They provide a touch of elegance.
These kits can be retrofitted to previously installed appliances.
(ref. Form # 750,166M)

Door Frame Kits

A decorative door frame kit is available for use with these appliances. It is designed to attach directly to the front face
of the appliance at the four edges of the glass enclosure panel resulting in the appearance of a picture frame.
(ref. Form # 750,098M)
Interior Brick Liner Kits
Cat. # Model Models
Where Used
HO259 BLK-5B SSBV-3530
H0260 BLK-6B SSBV-4035
4 Piece Door Trim Kits
Polished Brass Brushed Stainless Models
Where Used
Cat. # Model Cat. # Model
26M82 4DFK35PB 26M85 4DFK35BS SSBV-3530
26M83 4DFK40PB 26M86 4DFK40BS SSBV-4035
(ref. Form #750,023M)
* Superior Nameplate Logo, 56L93, is not included.
(ref. Form # 750,008M)
Outside Combustion Air Kits
Cat. No. Model No. Description
81L87 FOAK-4 Combustion Air Kit (with
duct)
81L88 FOAK-4LD Co mbu sti on Air Kit
(without duct)

Standard Remote Control System

The Model RCL (Standard) Remote Control System,
features a simplistic OFF/ON control function for the
fireplace. This model includes a hand-held transmitter,
a remote receiver with wall-mount cover plate and
all hardware required to install the unit. The remote
receiver can be wall or hearth mounted.
The transmitter has ON and OFF functions that are
activated by pressing either button on the face of
the transmitter. When a button on the transmitter
is pressed, a signal light illuminates briefly to verify
that a signal has been sent.
The Model RCL is designed to operate with all mil-
livolt ignition systems, as well as electronic ignition
systems. It may be installed with use for either
natural gas or propane gas appliances. The RCL
offers ease of installation and allows you to execute
on-off commands to the fireplace effortlessly with
one simple motion.
The Model RCL comes complete with detailed operat-
ing instructions.
Remote Control Kit, Standard
Cat. No. Model No. Description
H0249 RCL Remote Control System
(Standard)
(ref. Form # 750,127M)