SVAT Electronics quick start Monitor Installation, CLEARVU5 QUICK START GUIDE

CLEARVU5 QUICK START GUIDE

STEP 2: Monitor Installation

Diagram A 1. Hold the adjustment head as shown in Diagram A. Remove the wingnut (part 1) by turning it counter-clockwise. Make sure you hold the adjustment head tightly while moving the

Diagram B	wingnut.
	2. Holding the adjustment head
	on its side as shown in Diagram
	B, lift part 2 (including the
Diagram C	screw)

3. Holding parts 3 and 4 securely as shown in Diagram C, connect part 3 and 4 to the top of the

mount stand.

Diagram D

4.While continuing to hold parts 3 and 4 securely, insert part 2 (including screw) into parts 3 and 4 as shown in Diagram D.

5.While holding the adjustment head as shown, thread the wingnut onto the screw by turning the wingnut clockwise.

6.If you need to adjust the mounting plate or adjustment head, loosen the wingnut slightly, adjust, and retighten.

7.If necessary, loosen the mounting plate knob by

turning counter-clockwise. Slide the mounting plate into the monitor’s mounting rail as shown.

8.Secure the mounting plate to the monitor by turning the mounting plate knob clockwise.

9.Plug the “3.5mm to RCA (female) wire” into the AV1/IN port on the monitor.

10.Plug the camera’s RCA output plug into the video input (yellow) end of the “3.5mm to RCA male wire.”

11.Repeat steps 1 and 2 for connecting a second camera to the AV2/IN port on the monitor.

NOTE: Please review the manuals for the included camera and monitor which can be found in their respective packages.

For more information on your SVAT product please visit: www.svat.com