www.svat.com
OPERATION DESCRIPTION 1
POWER ON
Each time immediately after power is restored; they system proceeds with auto
detection and warming up function, and then enters RECORD mode.
RECORD MODE
Under the RECORD mode the system uses two types of recording format:
Continuous Recording and Motion Detection Recording. The recording format
depends on the <RECORD MODE> settings on the SETUP mode. The interval of the
captured frames depends on the <CAPTURE RATE> settings on the SETUP mode.
When recording has been set as continuous recording, for every fixed period of time
the system will automatically record one frame and when recording is set to Motion
Detection recording, for a fixed period of time the system will automatically detect
any changes on the screen (Motion Detection Sensitivity Rate is adjustable accord-
ing to preference).
When the memory is full and the “Full Stop-Overwrite” switch on the front panel is
switched to “Overwrite”, the memory will be overwritten starting with the oldest data
first, or switch to “Full Stop”, where it will automatically enter STOP mode and not
record any new date.
Under record mode, press << >> button to enter STOP mode.
1) Record Status:
MD-Motion Detection Recording
CNT-Continuous Recording
2) Image Resolution:
640x480
320x240
3) Image Quality: HIGH, MEDIUM and LOW
REC. . 2004/ 0 4 / 07 12:10:1 0
MD 640x480/HI 190 93.4%
(4) (5)(1) (2) (3)