SVAT Electronics VISS7500 Monitor Installation & Operation, Using The Monitor, Door Unlock

MONITOR INSTALLATION & OPERATION

AC: 110 ~ 240V

145cm ~ 160cm

The optimum height of the monitor for installation is 145cm ~160cm from the center of the pick-up tube of the monitor to the ground.

Take two screws and fix the support of the wall-mount on the wall and then install the monitor.

USING THE MONITOR:

•When the monitor is in the OFF mode, pressing the Talk/View button turns the monitor and outside camera ON. Monitor and camera will automatically turn off after 1 minute.

*NOTE* The cameras CALL button must be pressed first by the visitor, followed by the Talk/View button in order to speak with your visitor.

DETERRING UNWANTED VISITORS

•If you discover unwanted visitors, pressing the WARNING button on the monitor will engage a loud siren in the outside camera in

order to deter the visitor.

ADJUSTING PICTURE/VOLUME

•Volume and Brightness control knobs are located at the bottom of the monitor for fine tuning.

DOOR UNLOCK

•This system supports any door strike rated between 12-14V DC. The door will remain unlocked for 10 seconds. Please refer to the wiring diagram for installation instructions.

www.svat.com now you can see