Swann 500 manual Accessing the Camera, Using IPFinder

3 Accessing the Camera

Using IPFinder

1.Insert the Installation CD-ROM into your computer’s CD-ROM drive to initiate the Auto-Run program.

2.Click the IPFinder item to launch the utility. The control panel will appear as below.

Display the connected camera(s).

Double click to link the Camera.

Click About to get the Version information of IPFinder.

Click Link to connect the selected camera.

Click Search to find the IP address of the connected camera(s).

Click Change IP to modify the IP address of the selected camera.

Click Exit to close the utility.

3.Once you get the IP address of the camera, launch the Web browser or UltraView to access your camera.

TIP The Installation CD-ROM provides a setup program that allows you to install IPFinder on your computer. To install IPFinder,

- 5 -