Instructions on how to attach a fixed camera and wall mounting bracket.
1. Firstly attach the camera onto the camera | 2. Adjust the camera bracket to suit your viewing |
bracket. Keep the orientation of the dome in | direction. Then secure the bracket into place by |
mind when mounting the camera. | screwing the locking screw in a clockwise |
| direction. |
7.Connect the AV and DC cable onto the back of the camera. This illustration shows how to connect the cables into the back of a Swann C500, but actual connections will vary depending on your camera.
8.We highly recommend you test the camera now. Connect the other end of the AV cable into you TV/monitor and power up the camera to see if you get a picture. Make sure the camera is in focus and all the appropriate settings are made. If possible, temporarily mount the dome to the desired location and check if the image is viewable.
3. Screw the camera bracket onto the bottom of | 4. Thread the AV cable through the wall |
the dome using the bracket retainer. | mounting bracket. Make sure the male DC plug |
| is passed through the bracket so it can be |
| connected to the camera. (See above image) |
5. Now thread the cable into the bottom of the | 6. Fix the wall mounting bracket onto the dome |
dome. | by screwing in the 3 holding screws in a |
| clockwise direction using a flat head screw |
| driver. |
9. Align the dome cover and dome ring over the | 10. Secure the dome cover to the dome body |
holes. (See image above) | using 3 screws supplied. |
To mount the dome onto your wall, please visit your local hardware store for wall mounting bolts. We recommend you get advice from your hardware store staff on the appropriate tools to use and wall mounting bolts for your wall. Please keep in mind the dome and wall mounting bracket weighs approximately 5.5 lb / 2.5 kg
Please make sure you remove the dark insert film if you wish to use this dome deterrent as a real dome camera. (See image below)