Camera features
1. |
|
|
| |
2. |
|
|
| |
1 | ||||
3. | Detachable Camera Stand | |||
4. | Microphone (enclosed in power socket) |
|
| |
5. Power Cable & DC Power Socket
2
4
Changing the channel on the Black Knight Camera
The Black Knight Cameras can be switched to any of four frequencies to assist in avoiding interference. Please see the illustration below for frequency settings. Unscrew the front of the camera case to gain access to the channel switch. To change the frequency/channel on the receiver, press the SEL button on top of the receiver to cycle through the channels. You can also switch the Loop/Normal switch to Loop, which will allow the receiver to switch through all four channels automatically. The LEDs indicate which channel is currently selected.
| + | Channel & Frequency settings | |
2 | 1 | 1 | Channel 1 |
|
| 2 | Both switches Right |
|
| 2414MHz | |
|
|
| |
3
5
Receiver features
+
Front view of camera with Switch Block (note the numbers 1 & 2 indicate the left side of the switch).
By changing these switch settings, the frequency that the Camera transmits on changes. Once you have set the channel on the Camera, select the same channel on the receiver. If you experience interference try a different channel.
Do not set two Cameras to the same channel or theywill interfere with each others signal.1 |
|
|
|
|
| Channel 2 |
2 |
|
|
|
|
| Top Left & Bottom Right |
|
|
|
|
| ||
|
|
|
|
| 2432MHz | |
|
|
|
|
|
| |
1 |
|
|
|
|
| Channel 3 (default) |
|
|
|
|
| ||
2 |
|
|
|
|
| Top Right & Bottom Left |
|
|
|
|
| 2450MHz | |
|
|
|
|
|
| |
1 |
|
|
|
|
| Channel 4 |
|
|
|
|
| ||
|
|
|
|
| ||
2 |
|
|
|
|
| Both switches Left |
|
|
|
|
| ||
|
|
|
|
| 2468MHz | |
|
|
|
|
|
|
Important Information about this product
Active
Channel
Leds
Channel
Selector
Button
SEL CH4 CH3 CH2 CH1
External antenna
Monitor or TV
Receiver | To Audio and | |
Video IN | ||
| ||
| Audio / Video Out | |
| Receiver | |
| Power Adaptor | |
| DC Socket | |
| Loop / Normal Switch |
•Please test all devices before final installation because transmission quality can often be improved by moving the components slightly.
•Beware of humid locations. Water droplets or spray may damage the receiver unit. If condensation does occur, do not use the equipment until it has dried out.
•Do not cut the DC power cable of the Black Knight Camera to fit with another power source. This may result in damage to the Black Knight Camera & any unauthorised modifications will void your warranty.
•The microphone for the Black Knight camera is in the power socket, and is not waterproof. The power socket must be protected from water to ensure correct operation.
•Interference from certain electronic equipment or the moving human body can also affect the range obtainable.
•Best Results are achieved where there is a clear “line of sight” or minimal number of solid objects between the Camera/Transmitter and Receiver. See diagram below.
Signal passes | x |
|
through 3 walls | Your home or office | |
|
| Monitor or TV |
Signal only passes |
| Receiver |
through 2 walls! |
|
|
4
5 |