Swann SW111-WIP, SW211-WIP user manual Introduction, Hardware Requirement

INTRODUCTION

This Software User Guide provides detailed instructions on operating Ultra View, a customized software application with a user-friendly interface allowing you to access and control your camera(s). You can connect up to 16 cameras to monitor different places and record events for each camera. With Ultra View, you can also change some basic settings of the camera, such as schedule profiles and motion detecting. In addition, if your camera supports advanced features, such as audio or pan/tilt function, you can use these functions through the control panels of Ultra View.

To use Ultra View, you must install it on to your computer. It is recommended to use a high performance computer if you want to connect multiple cameras simultaneously. The following provides suggested system requirements:

Platform: Microsoft® Windows® 2000/XP/Vista.

Hardware Requirement:

1 camera connected: Intel Pentium III 800MHz; 512MB RAM

2 ~ 4 cameras connected: Intel Pentium 4 1.3GHz; 512MB

RAM

5 ~ 8 cameras connected: Intel Pentium 4 2.4GHz; 1GB RAM

9 ~ 16 cameras connected: Intel Pentium 4 3.4GHz; 2GB

RAM

Resolution: 1024x768 or above

NOTE When you use Ultra View to record video clips, store the recorded files to an exclusive hard disk drive in your computer to ensure there will be sufficient storage space.

- 2 -