
Night Hawk™ FAQs
?Can I add extra wireless cameras to my Swann Nighthawk Camera pack?Yes, the Swann Nighthawk Camera can be set to any of 4 channels the receiver is capable of using but you will not be able to view two wireless cameras on the same frequency or channel at the same time. Each additional camera must be set to a different channel on your receiver.
Swann recommend a maximum of 3 wireless cameras for optimum reception quality but 4 cameras can be set up successfully with careful camera placement.
?Can other devices interfere with the Swann Nighthawk Camera?Yes, some common causes of interference are Wireless LAN equipment, cordless 2.4GHz telephones and microwave ov- ens (while they are actually cooking). Using the Swann Nighthawk Camera which has 4 switchable channels will allow you to change to a channel that is further away from the interference source to minimize the potential for lines and noise
on your screen/recording.?How do I connect my Swann Nighthawk Camera to a TV/VCR?The Swann Nighthawk Camera receiver comes with an AV cable which plugs into the Video ‘in’ and Audio ‘in’ connectors on your TV or VCR. These plugs are commonly referred to as ‘RCA plugs’ and are similar to the connectors used by game consoles and DVD players. If you plug your Swann Nighthawk Camera’s receiver into your VCR so that you can record the footage, you will need to select the AV channel on your VCR and then the channel on your TV that you normally use to watch video movies from your VCR. If you plug your Swann wireless receiver directly into your TV, you can view the images on the appropriate AV channel, but you will not be able to record.
?Can I use my Swann Nighthawk Camera outdoors?The Swann Nighthawk camera has an enclosed metal case and weather resistant cap to make it suitable for outdoor applications. Weather resistant cameras are able to be used in the outdoors if shielded from direct sun, rain, temperatures, snow and wind. Camera power supplies must never be left exposed.
?How far can I see during the day with the Swann Nighthawk Camera?In daylight it is most useful to measure the optical range of the camera in terms of Distance to Subject (DTS). DTS is a measurement of the ideal distance to view a subject from a camera viewing a 6ft/1.8m tall person from head to toe on a standard television. This assumes the camera is viewing from 3ft/0.9m off the ground.
The DTS for the Swann Nighthawk Camera is 2.5m.?I have more than one wireless camera. Can I view or record these cameras simultaneously?
The Swann Nighthawk Camera receiver is only capable of displaying an image from one wireless camera at a time. To view or record more than one camera you must set the switch at the back of the receiver to ‘Loop’. This will make the wireless receiver automatically cycle through the 4 channels sequentially, and linger on each for about 5 seconds before repeating the sequence.
?What iswww.swannsecurity.com
Enquiries: info@swann.com.au | Wireless Surveillance |
Product Code: