User’s Manual
TIME SET
∨
Configure system date and time:
2008/08/08 20:08:08 | [ Up] and [ Down]: move the cursor | |
PRESS (UP,DOWN), | ENTER (SELECT) | [ SEL]: modify the value |
| ||
PRESS (MENU) TO | EXIT | [ Menu]: exit and save |
|
| |
5.13 Hard Disk Set
HARD DISK SET
OVERWRITE ENABLED | [YES] |
HDD SIZE | 120042MB |
HDD USED | 80865MB 77% |
HDD FORMAT |
|
PRESS (UP, DOWN), | ENTER (SELECT) |
PRESS (MENU) TO | EXIT |
HDD SIZE:
OVERWRITE ENABLED:
If you choose “YES”, recording continues and overwrites previous recordings when the hard drive is full.
If you choose “NO", the recording process will stop when the hard drive is full.
Indicates the total capacity of the hard drive installed in the DVR.
HDD USED:
Indicates the space used in the hard drive and the percentage of hard drive space being used.
HDD FORMAT:
If you format the hard drive, it will erase all the data in the hard drive. You need to input your password when you want to format the HDD.
Note: When you install a new hard drive in the DVR, please use this function to format the hard drive.
5.14 Motion Set | MOTION RECORD TIME: | |
This number indicates how many | ||
| ||
| seconds the motion detection recording | |
| - 10 - | |
| lasts after the DVR has been triggered by | |
| motion. |
