CHAPTER 2 Sybase Software Asset Management
39
Starting the software manually
If the license manager is not running, you must start the license manager
manually. Use the startd.sh script in the /bin directory:
$SYBASE/$SYBASE_SYBASE/bin/startd.sh
Starting SySAM as an automatic service
To start the SySAM sofware automatically when the system is starting, see
“Starting Sybase Services Automatically” in this document.
Adding feature licenses
This section describes how to update the license file to enable Adaptive Server
features. To add features for which you have licenses follow the instructions
under “Entering license keys” above. Because you are adding licenses to an
existing configuration, you must notify the license daemons of the changes by
issuing a reread command.
Run the license management utility lmutil lmreread from the
$SYBASE/$SYSAM/bin directory:
$SYBASE/#SYBASE_SYSAM/bin/ lmutil lmreread
If you encounter problems with new licenses, check the lmgrd.log file in the
$SYBASE/SYBASE_SYSAM/log directory.