Sylvania T5HO Performance Guide, Specifications1, Dimming Control Specifications2, Ordering Guide

											(0-10V)
<10% THD Electronic T5 HO Fluorescent Dimming Systems											PHO-DIM
											Normal Ballast Factor
		Input	Input		Rated2,3		Ballast3		Input3	System	Performance Guide
Item		Voltage	Current	Lamp1	Lumens	No. of	Factor	System3	Wattage	Efficacy
Number	Description	(VAC)	(AMPS)	Type	(lm)	Lamps	(BF)	Lumens	(W)	(lm/W)

49671	QT1x54/120PHO-DIM	120	0.54	FP54T5HO	5000	1	1.00	5000	62	81
							0.01	50	8
49672	QT1x54/277PHO-DIM	277	0.23	FP54T5HO	5000	1	1.00	5000	61	82
							0.01	50	8
49673	QT2x54/120PHO-DIM	120	1.07	FP54T5HO	5000	2	1.00	10000	120	83
							0.01	100	18
49674	QT2x54/277PHO-DIM	277	0.45	FP54T5HO	5000	2	1.00	10000	117	85
							0.01	100	18

1Also compatible with other manufacturer’s equivalent lamp types that meet ANSI standards.

2Rated lamp lumens and performance data based on PENTRON® HO lamps.

3At 35°C lamp ambient temperature

		LAMP
Black				Red
	L		1
White	N			Red
Gray		DIMMABLE BALLAST	2	Blue
	-				LAMP 2
Violet	+	1-10Vdc control input	3	Blue
			4
Class 1 or Class 2 Circuit					LAMP 1

Specifications1

Starting Method: Programmed

Start

Circuit Type: Series

Lamp Frequency: > 40 KHz

Lamp CCF: Less than 1.7

Starting Temp: 50°F minimum

Input Frequency: 60 Hz

Low THD: < 10%

Power Factor: > 98%

Voltage Range: +/–10% of Rated Input

UL Listed Class P, Type 1 Outdoor CSA Certified

70°C Max Case Temperature

FCC 47CFR Part 18 Non-Consumer Class A Sound Rating

ANSI C62.41 Cat. A Transient Protection Dynamic End-of-Lamp-Life Sensing Remote Mounting up to 7 feet

QUICKTRONIC® 1x54PHO-DIM				Yellow/Wht
Black	L		1	Yellow
White			2
	N			Yellow
			3
		DIMMABLE BALLAST	4	Red
Gray	–		5	Red
			6	Blue
Violet	+	1-10Vdc control input
			7	Blue

Class 1 or Class 2 Circuit

QUICKTRONIC 2x54PHO-DIM

A list of compatible controllers and wiring examples are on pages 64 & 65.

Dimensions:

Overall: 425mm L x 30mm W x 30mm H

Mounting: 415 mm

Wiring:

Push-in connectors (no leads provided)

Use 18AWG solid copper wire only

Packaging:

Quantity: 20

Weight: 1.0 lbs ea. (approx)

.1 Data based on PENTRON HO lamp type. See the SYLVANIA QUICKTRONIC Electronic Ballast Technology and Specification Guide (ECS-ELECTRONIC) for other lamp combinations.

Dimming Control

Specifications2

Dimming Control2: 1-10Vdc

two wire control (10V = full output, 1V = minimum output)

Line Voltage Protection:

Ballast goes to 90% if line voltage is inadvertently applied to control leads. Ballast will source up to 0.5mA for control purposes. May be wired as Class 1 or Class 2 circuit.

QUICKTRONIC HELIOS ballasts are compatible with a wide range of 0–10V controllers available from various manufacturers. A list of controls companies is on pages 64-65. (Controls list literature ordering code ECS041.)

System Life / Warranty

QUICKTRONIC products are covered by our QUICK 60+® warranty, a compre- hensive lamp and ballast system warranty. For additional details, refer to our QUICK 60+ warranty bulletin.

Item Number	49673 QT 2 x 54 / 120 PHO-DIM	System Type – PHO-DIM	Ordering Guide
QUICKTRONIC		Line Voltage
			Specifications subject to change
Number of Lamps (1, 2)		Primary Lamp Wattage	without notice.
OSRAM SYLVANIA National Customer Service and Sales Center				63
1-800-LIGHTBULB (1-800-544-4828)
www.sylvania.com