PREPARATION FOR USE
ANTENNA/CABLE CONNECTIONS
Satellite Box or Cable Box (Not supplied)
From Cable System or Satellite Dish 
OUT
IN
Rod Antenna | VHF/UHF Antenna | |
(Not supplied) | ||
(Supplied with 13” model only) | ||
|
VHF Antenna (Not supplied)
From
Cable System
or | |
| |
Cable (Not supplied) |
|
| UHF Antenna |
or | (Not supplied) |
VHF/UHF or Combiner
(Not supplied)
ANT.
or | Flat |
|
VHF/UHF COMBINED ANTENNA
The VHF/UHF Rod Antenna (supplied with 13” model only) is detachable. Insert the stem of the antenna into the hole on the
NOTE:
Before plugging the Rod antenna into antenna termi- nal, check that the pin is not bent. If it is bent, straighten the pin as illustrated, then plug the pin into antenna terminal.
VHF/UHF SEPARATE ANTENNAS
In some areas it will be necessary to use an outdoor antenna.
CABLE WITHOUT CONVERTER/ DESCRAMBLER BOX
Use this connection if your cable system connects directly to your TV/VCR without a converter box. By using this connection you can:
1)Use the TV/VCR remote to select channels.
2)Program one or more unscrambled channels for Automatic Timer Recording.
NOTE: This unit will ONLY record and view the same channel.
Bent pin
Cable Plug
(Needs to be straightened) | (Straight pin) |
NOTE:
The connection of an indoor antenna may not always give acceptable TV reception.
CABLE WITH CONVERTER/ DESCRAMBLER BOX OR SATELLITE BOX
If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown in the diagram.
By using this connection you can also record scram- bled channels. However, channel selection must be made with the converter box or satellite box. This means that channels cannot be changed using the TV/VCR Remote Control. Unattended timer record- ing is limited to one channel at a time.
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s attention to Article
- 9 - | EN |
