PREPARATION FOR USE

ANTENNA/CABLE

CONNECTIONS

DIPOLE ANTENNA HOOK UP

1.Push the stem of the Dipole Antenna (accessory) into the hole for antenna at the back of TV/VCR.

2.Connect the flat twin-lead cable from the Dipole Antenna to the 300/75 ohm Matching Adapter (accessory).

3.Plug the Matching Adapter to ANT terminal of TV/VCR as shown in drawing.

For the best reception, extend the Dipole Antenna and adjust its length and position. (Avoid handling the top section when making adjustments).

NOTE: If it is difficult to get good reception with the indoor antenna, the use of an outdoor antenna is recommended. Before an outdoor antenna is connect- ed to the set, the indoor antenna should be discon- nected.

Flat twin-lead cable

Dipole Antenna

(Supplied)

Matching

Adapter

(Supplied)

ANT.

VHF/UHF COMBINED ANTENNA

A VHF UHF 75 ohm combination antenna can be connected to ANT terminal.

VHF/UHF SEPARATE ANTENNAS

In some areas it will be necessary to use an outdoor antenna.

VHF Antenna (Not supplied)

 

UHF Antenna

VHF/UHF

(Not supplied)

Combiner

 

(Not

 

supplied)

 

ANT.

 

Flat twin-lead cable

CABLE WITHOUT CONVERTER/ DESCRAMBLER BOX

Use this connection if your cable system connects directly to your TV/VCR without a converter box. By using this connection you can:

1)Use the TV/VCR remote to select channels.

2)Program one or more unscrambled channels for Automatic Timer Recording.

NOTE: This unit will ONLY record and view the same channel.

From Cable System

75-ohm Coaxial

Cable (Not

supplied)

ANT.

Antenna/Cable Connections Continued on the Next Page.

- 10 -

EN

9J27

Page 10
Image 10
Sylvania C6309CD owner manual Preparation for USE, ANTENNA/CABLE Connections