OTR (One Touch Recording)

This function enables you to set a recording length simply by pressing the REC/OTR button on the TV/VCR.

Make sure ...

TV/VCR power must be turned on.

Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.)

NOTES:

This function CANNOT be done from the remote control.

Recording starts immediately when the REC/OTR button is pressed.

When the REC/OTR button is pressed 18 times, the TV/VCR returns to the Normal Recording mode.

To stop the OTR operation, press the STOP button on the TV/VCR or on the remote control.

To show the remaining time, press the DISPLAY button on the remote control so that “OTR” appears on the TV screen. (It will show up momen- tarily then disappear.)

Recording stops when 0:00 is reached.

Please note that in the SLP mode maximum record- ing time, assuming the tape is started at the begin- ning, is 8 hours using T-160 (or 6 hours using T- 120).

If the tape runs out before the end time, the TV/VCR will switch to the Stop mode immediate- ly, ejects the tape and turns itself off.

1 Select the channel to be recorded

Press the number buttons on the remote control or the CHANNEL Kor Lbutton.

Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be recorded is selected on the cable box or satellite box.

2Select the tape speed

Press the SPEED button to select the desired tape speed (SP/ SLP).

3 Begin OTR

OTR(2 : 30)

 

Press the REC/OTR button on the TV/VCR as many times as needed. The recording length will be deter- mined by the number of times you SP press the REC/OTR button. Each

additional push will increase the recording time by 30 minutes. It is set up to 8 hours.

Push(es)

Display

 

Recording length

1 push

 

(normal recording)

 

 

 

 

2 pushes

0:30

 

30 minutes

 

 

 

 

3 pushes

1:00

 

60 minutes

 

 

 

 

17 pushes

8:00

 

480 minutes

 

 

 

 

COPYING A VIDEO CASSETTE (Requires a VCR or camcorder)

You can make copies of video tapes made by friends or relatives for your enjoyment.

WARNING: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws.

Connect your TV/VCR and a Source (Playing) VCR using the following diagram.

AUDIO

VIDEO

 

EARPHONE

 

 

 

[The TV/VCR]

 

[Ex: Source (playing)

 

VCR or camcorder]

Audio/Video

VIDEO

 

adapter cable

OUT

IN

(not supplied)

 

 

 

AUDIO

 

1)Insert a pre-recorded video cassette into the Source (Playing) VCR or camcorder.

2)Insert a blank video cassette, or one you want to record over, into the TV/VCR’s cassette compart- ment.

3)Press the SPEED button on remote control for the TV/VCR to select the desired recording speed (SP/SLP).

4)Press the CHANNEL Kor Lbutton on the TV/VCR until “AUX” appears on the screen.

5)Press the RECORD button on the TV/VCR. 6)Begin playback of the tape in the source (Playing)

VCR or camcorder.

NOTE: For best results during dubbing, use the TV/VCR’s front panel controls whenever possible. The remote control might affect the source (Playing) VCR’s playback operation.

- 25 -

EN

0B19

Page 25
Image 25
Sylvania D6313CCB owner manual OTR One Touch Recording, Pushes Display Recording length

D6313CCB specifications

The Sylvania D6313CCB is a highly regarded LED tube light designed to enhance both commercial and residential lighting environments. This fixture stands out due to its innovative features and impressive energy efficiency, making it a popular choice for a variety of applications.

One of the primary characteristics of the D6313CCB is its 13-watt power consumption, which significantly reduces energy usage compared to traditional fluorescent tubes. This not only lowers electricity bills but also contributes to a more sustainable environment. The light produced by the D6313CCB is bright and clear, with a lumen output of up to 1,800 lumens, delivering excellent illumination for both workspaces and living areas.

The design of the D6313CCB incorporates advanced LED technology that ensures a long lifespan, typically exceeding 50,000 hours. This durability reduces the need for frequent replacements, thus offering additional savings on maintenance costs. Moreover, the LED construction eliminates the flickering and humming that often accompanies traditional fluorescent lighting, enhancing the overall user comfort.

The D6313CCB is designed for easy installation and versatility. It is compatible with most standard ceiling fixtures, making it a straightforward retrofit option for locations currently using fluorescent lighting. Furthermore, the tube is available in different color temperatures, allowing users to select the right ambiance for their specific needs, from warm white to daylight.

Safety is a paramount consideration in the design of the Sylvania D6313CCB. The fixture is free from hazardous materials such as mercury, which is often found in traditional fluorescent lights. This not only makes it safer for the environment but also reduces potential health risks associated with breakage.

Lastly, the aesthetic appeal of the D6313CCB cannot be overlooked. Its sleek and modern design fits seamlessly into various décor styles, making it an ideal lighting solution for offices, retail spaces, and homes alike. Its performance, combined with its energy efficiency and design, positions the Sylvania D6313CCB as an exceptional choice for those seeking reliable and stylish illumination.