CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL
INPUT JACKS, MD DECK OR DAT DECK
Use audio coaxial digital cables (commercially available) for the audio connections.
To VIDEO INPUT jack | To VIDEO OUT jack |
or
wide screen TV
or |
|
|
|
|
|
To | To |
|
|
|
|
INPUT jack | DIGITAL AUDIO OUT |
| VIDEO OUT | AUDIO OUT | |
| COAXIAL | S | VIDEO | R | L |
| (PCM/BITSTREAM) | ||||
Amplifier equipped with digital
input jacks, MD deck,
DAT deck, etc.
To COAXIAL DIGITAL AUDIO INPUT jack
To COAXIAL DIGITAL
AUDIO OUT jack
[Fig. 4]
Notes
●The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or DAT deck.
●Be sure to turn off the power to all components in the system before connecting another component.
●Refer to the Owner’s Manuals for the components to be connected to the DVD player.
●Set DOLBY DIGITAL and DTS to OFF for audio output in the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers.
●When DOLBY DIGITAL is set to OFF and VIRTUAL 3D to ON for audio output in the setup mode and you select the audio source in a 5.1 channel Dolby Digital surround format, the audio will be muted.
- 11 - | EN |
9F21
