45
Recording / Dubbing
Before you
start
Recording /
Dubbing Playback Editing
Connections Other Setups VCR functions Others Español
Initial Setups
Recording & Playback Navigator (Cont’d)
Programming a Recording with
the Recording & Playback
Navigator
Before programming,be sure to select the desired Rec
Mode.(See page 36 on how to select the Rec Mode.)
1Press PROGRAM RECORDINGS.
Switches to the HDD mode, and the Programmed
Recordings Screen will appear.
2Using / / / , select the desired cell.
•For example,to record from 4:00 pm two days
from the present day,choose the cell as follows.
There are two ways to program a recording.
1)Direct Program---Press CHANNEL / or
the Number Buttons to select a channel.Press
ENTER.The cell turns pink indicating that the
timer programming is now set in that cell.
Press PROGRAM RECORDINGS to exit.
2)Detailed Program---Press ENTER
“New Program” will appear.With “New
Program”selected,press ENTER again.
Timer Programming Window will appear.
Enter the necessary information by following the
instructions described in ‘Timer Recording’ on pages
40-43.
8
CHEnd TimeStart Time
LPHDDFri 3 9 : :AM00FEB/
0:39HDD LP
10 AM00
Rec To Mode
Date
3
4
5
PM
ordings Scheduled Recordings
THU FRI SUN MON TUE WED THU FRI
TODAY SAT
Present day
Tomorrow Day after tomorrow
Cell
HDDHDDHDD
To Change or Cancel the
Program
1Repeat steps 1-2 above.
2Press ENTER to call up the menu window.
3To change the program
Using / ,select “Program Change”, then
press ENTER.
Timer Programming Window will appear.
Correct the information,then press ENTER.
To cancel the program
Using / ,select “Timer Program”, then
press ENTER.
Timer Programming List will appear.
Press CLEAR .
Confirmation window will appear.Select “Yes ”, and
press ENTER.
To program a new Timer Recording
Using / ,select “New Program”, then
press ENTER.
4Press TIMER PROG.to exit.
DisplaDisplay
ProgProgram Changeam Change
Timer ProgTimer Programam
NeNew Progw Programam
HDDHDDHDD
4380_029-065.qx3 05.11.16 2:28 PM Page 45