43
Recording / Dubbing
Before you
start
Recording /
Dubbing Playback Editing
Connections Other Setups VCR functions Others Español
Initial Setups
Timer Recording (Cont’d)
To delete a program from the list:
1. Using / , select “Delete”, then press
ENTER.
Confirmation window will appear.
You can access this screen by pressing CLEAR
instead of ENTER at step 2.
2. Using / ,select “Yes”if you want to delete
the title.
4PressTIMER PROG. to exit.
Delete this Delete this Timer ProgTimer Program?am?
Yes No
Hints for Timer Recording
The priority of overlapped settings
When the timer programmings are overlapped,you will
receive a warning message.
If this happens,check the timer programming and change the
programming as necessary.Otherwise, the unit will prioritize
recording as described below.
Same start time and different end time:
The program set first has the priority.
Different start time and different end time:
A program with the earlier start time has the priority.
Recording time is entirely overlapped:
PROG.2will not be recorded.
End time of Program 1is the same as the
start time of Program 2:
The amount of time cut off differs depending on the
recording media.
PROG. 1
PROG. 2
Actual
recording
The last 30 seconds (at the longest) will be cut off.
PROG. 2PROG. 1
PROG. 1
PROG. 2
Actual
recording PROG. 1
PROG. 1
PROG. 2
Actual
recording PROG. 1
PROG. 2
PROG. 3
PROG. 3
The first 15 seconds (at the longest) will be cut off.
PROG. 1
PROG. 2
Actual
recording PROG. 2
The first 15 seconds (at the longest) will be cut off.
PROG. 1
Note
•As to the timer program in progress (which is shown
in red in the Timer Program List),you only can edit
the end time.The changes made during recording will
be recognized as only specific to that recording in
progress and it will not affect the daily or the Weekly
Recording Setting.
4380_029-065.qx3 05.11.16 2:28 PM Page 43