Sylvania LC195SLX owner manual 5Channel List 5Manual Register, Using CH K/L

Español Français English

5Channel List	5Manual Register
The channels selected here can be skipped when selecting the channels	This function lets you add the channels that were not added by
using [CH K/L].	the autoscan due to the receptible condition at the initial setting.
Those channels can still be selected with [the Number buttons].

INTRODUCTION

1Press [SETUP] to display the main menu.

2Use [Cursor K/L] to select “CHANNEL”, then press [ENTER].

3Use [Cursor K/L] to select “Channel List”, then press [ENTER].

Channell

Autoscan

Channel List

Manual Register

Antenna

4Use [Cursor K/L] to select the channel you want to remove, then press [ENTER].

Channell Listi

Highlight channels for Ch			DTV	6
Up/Down key selection.				27
			DTV	8
				9
			DTV	48
				58
			DTV	67
Ch Select		Watch/Skip	BACK
	ENTER		Back

•The channel display for the removed channel darkens. You will not be able to select the channel again using [CH K/L].

•To reactivate a removed channel, use [Cursor K/L] and press [ENTER]. The registered channels are highlighted.

•When you remove a main channel, its subchannels are removed as well.

Note:

•The channel with the “DTV” indicated on the display is ATSC. Otherwise the channel is NTSC.

5Press [SETUP] to exit.

	PREPARATION
1 Press [SETUP] to display the main menu.

2Use [Cursor K/L] to select “CHANNEL”, then press [ENTER].

	WATCHING
	TV
3 Use [Cursor K/L] to select “Manual Register”, then	OPTIONAL
press [ENTER].	SETTING
Channell
Autoscan
Channel List
Manual Register	TROUBLESHOOTING
Antenna
4 Use [the Number buttons] to enter the number of the
channel you want to add, then press [ENTER].

			INFORMATION
	11
Manuall Registeri
For analog channels, select a		Register
channel to register using number
keys.
For digital channels, you must
perform Autoscan function.
Ch Change	BACK
		Back

5Press [SETUP] to exit.

Note:

•If setup completes successfully, “Added to the channel list” is displayed.

•If external input is used, it is not possible to register the channel and “Unavailable” will be displayed on the TV screen.

•By using [CH K / L], you can select the memorized channels only.

19

EN