Setting the Clock
1.Press and hold the CLOCK Set Button.
2.While holding the CLOCK Set Button, press the Hour Button to adjust the hour and the Minute Button to adjust the minute.
3.When finished, release the CLOCK Set Button.
Radio Operations:
1.Press the Standby Button on the unit or Remote Control to power on the unit.
2.Slide the RADIO/iPod/AUX selector to RADIO position.
3.Slide the Band Switch to AM or FM as desired. (Note: If stereo FM radio station is receiving, the unit will play it in stereo mode automatically without any indicators.)
4.Turn the Tuning Knob to receive the desired radio station. The radio frequency of the selected station will appear on the display.
5.Turn the Volume Knob to adjust volume as desire.
6.When finished listening, press the Standby button to power off the unit.
ANTENNAS
AM - This unit has a build in ferrite rod antenna, which provides adequate reception in most areas. If reception is weak, turn the unit to improve reception.
FM - The FM Wire Antenna is for FM reception only. If reception is weak, adjust the location of the antenna.
Connecting to an External Audio Player using the AUX IN Jack
1.Insert one side of the 3.5mm audio connection cable (not included) to the AUX IN Jack on the rear of unit.
2.Insert the other side of the connection cable to the Phones jack /Line out jack/Aux Out jack of the external audio device. (Such like the
3.Slide the AUX/iPod/RADIO Selector to AUX IN position.
4.Power on both units.
5.Play the music in the connected external audio device as usual.
6.Turn the VOLUME Knob to adjust volume.
9
