Manuals / Sylvania / Home Audio / Speaker

Sylvania SPA021 Pairing A Bluetooth Device, Care And Maintenance, Troubleshooting Guide

Models: SPA021

1 8
Download 8 pages 39.06 Kb
Page 7
Image 7
PAIRING A BLUETOOTH DEVICE

PAIRING A BLUETOOTH DEVICE

1.Turn on your Bluetooth device.

2.Power on the unit and switch to Bluetooth Mode. It will automatically go into pairing mode to search for Bluetooth devices. You will know you are in pairing mode when the LED is blink.

3.If your Bluetooth device is not able to pair to the unit, switch off the unit and switch on again to break previous Bluetooth connections and reset the Bluetooth module.

4.Navigate to your Bluetooth device’s setup screen, find “SPA021” and connect.

Note: If your Bluetooth device prompts for a pairing code, enter ‘0000’.

5. When LED will light up solid when it is 'paired'.

Note: Users should consider updating their OS if experiencing trouble with pairing or playing music.

6.To disconnect pairing, switch off the unit.

7.To connect to another Bluetooth device, repeat steps 3-4.

CARE AND MAINTENANCE

1.Clean the unit with a soft, damp (never wet) cloth. Solvent or detergent should never be used.

2.Avoid operating your unit under direct sunlight or in hot, humid or dusty places to reduce the risk of fire or electric shock.

3.Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps or motors.

4.Unplug the AC adapter from the unit and the electrical power outlet immediately in case of malfunction.

TROUBLESHOOTING GUIDE

#If the sound is distorted: Try lowering the volume control of your sound source or musical instrument. Also, try to reduce the overall volume of the unit.

#If there is too much bass: Try adjusting the bass control on the unit to lower the bass level. This will allow you to play the music louder before clipping (distortion) occurs.

#If there is a high-pitched whistling noise when using microphones: This is probably feedback. Point the microphones away from the speaker.

#If you can’t hear the microphone over the music volume: Turn down the music volume from your source.

SPECIFICATIONS

Frequency:

FM 87.5 - 108 MHz

AC Adapter: Input - 120V~240V ~ 60Hz

Output - DC 15V 1A

Accessiories: AC Adaptor, Microphone x 1, RCA Audio Cable x 1

Rate Power: 10W (RMS: 15W)

Accessories: AC Adaptor, Microphone x 1, RCA Audio Cable x 1, instruction manual

Cabinet dimension: 265(L)*200(W)*370(H)mm

Weight: 11.3kg

7

Page 6 Page 8
Page 7
Image 7
Sylvania SPA021 instruction manual Pairing A Bluetooth Device, Care And Maintenance, Troubleshooting Guide, Specifications
Page 6 Page 8

FAQ

How do I pair a Bluetooth device with the Sylvania SPA021 speaker?

Turn on your Bluetooth device, power on the unit, switch to Bluetooth mode, and follow the on-screen instructions to pair. Note: If prompted for a pairing code, enter 0000.

How should I clean and maintain my Sylvania SPA021 speaker?

Clean the unit with a soft, damp cloth, avoiding the use of solvents or detergents. Keep the unit away from direct sunlight, heat, humidity, and electrical noise sources.

What should I do if I experience distorted sound from my Sylvania SPA021 speaker?

Try lowering the volume control of your sound source or musical instrument. Additionally, reduce the overall volume of the unit to resolve distortion issues.