E CD OPERATION
H GENERAL
1 Set function to CD.
2 OPEN the disc compartment and place a disc with the printed side up. The total number of tracks
is displayed.
3 Press 
PLAY/PAUSE to start play- the indicator lights up:
The number of the track being played is displayed.
4 Turn VOLUME to adjust the sound.
STOP - Stops play.
PLAY/PAUSE - Pauses play. To resume play, press again.
, 
SKIP/SEARCH - Searches for a particular
point during playback. Keep 
or 
pressed and then release it.
PROGRAM
In stop state, press PROGRAM, the indicator lights up and flashes ,use skip/search to select the track you wish to program . Press PROGRAM. button to memorize the track you choose. Repeat this step for more tracks you wish to program.(maximum up to 20 tracks )Then press PLAY to start.
To erase the programmed tracks, Press STOP and open the CD door.
NOTE
Do not use irregular shape CDs(example:
To turn off the unit completely, set function to TAPE with all cassette keys released.
To listen with the headphones, connect headphones with a stereo mini plug to the PHONES jack.
If an erroneous display or malfunction occurs, disconnect the AC cord and remove all the batteries to turn off the display. Then turn the power back on.
COPYRIGHT
Please check the copyright laws relating to recordings from disc, radio or external tape for the country in which the machine is being used.
I SPECIFICATIONS
-Skips to the beginning of a track. Press 
or repeatedly
REPEAT
Press REPEAT once- the indicator lights up and
flashes: A single track is played repeatedly. Select
a track with | or | . |
Press REPEAT twice- | the indicator lights up: | |
All tracks are played repeatedly.
octagonal ones). It may result in malfunctions. 
Do not place more than one disc in the disc compartment.
Do not try to open the disc compartment during play.
Do not touch the lens. Doing so may cause malfunctions.
Tuner section |
|
Frequency range: | FM : |
| AM : |
Deck section |
|
Track format: | 4 track, 2 channels |
Frequency range: | Normal tape |
Recording system: | DC bias |
Erasing system: | Magnet erase |
Heads: | Recording / playback head |
| Erasure head |
General |
|
Speaker: | 77 mm cone type (2) |
Output: | Headphones jack (stereo jack) |
Power output: | 1.0 W +1.0 W |
Power requirements: DC 12 V using eight size C batteries,
| AC 120V, 60Hz |
Weight: | 2.4Kg (excluding batteries) |
Dimensions: | 290(W)x160(H)x250(D) mm |
Accessory: | AC cord (1) |
F TUNER OPERATION
CD player section |
|
Disc: | Compact disc |
Specifications and external appearance are
subject to change without notice.
1 Set function to RADIO.
2 Select a band with BAND.
3 Tune to a station with TUNING.
4 Turn VOLUME to adjust the sound.
For better reception - Extend the FM antenna and orient it for the best reception; AM antenna is inside the unit. Position the unit for the best reception.
FM ST: Reception is stereo. When receives FM stereo signal, the FM ST indicator lights up.
FM: When an FM stereo broadcast contains noise, set to FM. Noise is reduced, although reception is monaural.
Scanning method: |
(semiconductor laser) |
| NOTE |
FM /FM ST | If the unit picks up noise from other electrical appliances |
Sets the FM sound to stereo or monaural. | nearby, like a TV or fluorescent ligts, move the unit away. |
G TAPE OPERATION
Use Type 1 (normal) tapes only.
PLAYING BACK A TAPE 1 Set function to TAPE.
2 Press 
STOP/EJECT to open the cassette
holder and insert a tape with the exposed side up and the side to be played facing out.
3 Press 
PLAY to start play.
4 Turn VOLUME to adjust the sound.
STOP/EJECT - Stops play.
PAUSE - Pauses play. To resume play, press again.
F FWD/ REW - Fast forwards/rewinds. To
stop winding. press 
STOP/EJECT.
RECORDING
Note that recording is done on only one side of the tape. 1 Insert a tape with the side to be recorded facing out.
Wind up the tape to the point where recording starts.
2 Get ready to record from the source.
To record from a CD: set function to CD and start play.
To record from the tuner: set function to RADIO and tune to a station.
3 Press 
REC to start recording.
PLAY is pressed simultaneously.
To stop recording, press 
STOP/EJECT.
To erase a recording, set function to TAPE and start recording.
