Sylvania SRCD817 manual Programmed playback

Listening to CD

EProgrammed playback.

PROGRAM

This feature allows you to program up to 32 tracks on a disc for playback in any desired order.

Note: You cannot program tracks while a disc is playing. If the disc is playing press the STOP button first before beginning the programming steps below:

1.) Press the PROGRAM button to enter the Program Mode. The Program number briefly shows '0 1', then the Program indicator flash.

Flash

2.) Press the F.R or F.F buttons to select the first track number you wish to enter in the program memory, the track number will flash.

Example: Track Number '0 8'.

Flash

3.) When the desired track number appears on the display, press the PROGRAM button again to enter that track in memory. The Program number will shows '0 2'.

4.) Repeat Steps 2-3, selecting a different track number each time until you have entered up to 32 tracks in the program memory.

Note: You may program the same track number to play multiple times in the program sequence if desired.

5.) Press the PLAY/PAUSE button to begin Programmed playback. The Program indicator stops flashing and remains 'on'. Playback will begin with the first track you programmed and will continue until the last programmed track has played.

6.) After the last track has played the player stops and the display shows the total number of tracks on the disc. However the program sequence remains in the memory.

The programmed sequence may be cancelled by, Pressing the open button, STOP button, switching to the AM, FM or PHONO or shutting the system 'off '.

FTo repeat a single or the entire disc.

REPEAT

Flash

Press the REPEAT button once. The Repeat indicator flashes. Press the F.R or F.F buttons to select the desired track, then press the PLAY/PAUSE button to begin repeat Playback of the selected track.

Press the REPEAT button twice. The repeat indicator remains 'on' . Press the PLAY/PAUSE button to begin repeat Playback of the entire disc.

To cancel Repeat Playback press the REPEAT button until the Repeat Indicator goes 'off ' . Repeat Playback is also cancelled by pressing the STOP button, or setting the Function selector to the AM , FM or PHONO position.

GProgram Repeat Playback

When Programmed Playback begins press the REPEAT button twice to activate the all tracks repeat feature.

The Repeat Indicator lights and all the tracks in your programmed sequence will be repeated continuously.

To cancel Programmed Repeat Playback press the STOP button until both the Program and Repeat Indicators go 'off '.

HRandom Playback.

RANDOM

In playing or STOP mode, press the RANDOM button, a cycle mark will be showed, when the display shows a random tack number, playback will begin automatically.

To cancel Random Playback press the STOP button.

8