Sylvania SRTD420 Connecting To Front A/V Input Jacks, DIGITAL INPUT JACKS DVD, CD, MP3 sound only

CONNECTING TO FRONT A/V INPUT JACKS

When you watch a program recorded on an another source (VCR, video camera or Video game system), use the audio/video input jacks on the front of the TV/DVD.

Connect the audio/video output	AUX
jacks of the source to the AUDIO
L/R and VIDEO jacks of this
TV/DVD. Then press SELECT until
"AUX" appears on the screen.

NOTE:

•When you connect a monaural VCR (another source) to this TV/DVD, connect the Audio output jack of the monaural VCR (another source) to the AUDIO L jack of this TV/DVD. The audio will distributed in both L and R channel equally.

	[Front of the TV/DVD]
[Another source]	To the
	audio out-
	put jacks
	Audio/Video	VIDEO	L–AUDIO–R
	cables
	(not supplied)
etc.

To the video
output jack	[Fig. 5]

CONNECTING TO AN AMPLIFIER/RECEIVER EQUIPPED WITH

DIGITAL INPUT JACKS (DVD, CD, MP3 sound only)

Use an audio coaxial digital cable available at retail stores for the audio connections.

Amplifier/Receiver equipped with

digital input jacks.

NOTES:

ANT.

COAXIAL

To COAXIAL DIGITAL
AUDIO INPUT jack
To DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COAXIAL jack	[Fig. 6]
(only DVD, CD, MP3 AUDIO OUT)

•The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or DAT deck.

•Be sure to turn off the power to all components in the system before making connections.

•Refer to the Owner's Manuals for the components to be connected to the TV/DVD.

•Set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a TV/DVD using incorrect set- tings may generate noise distortion, and may also damage the speakers. (See page 28 to set DOLBY DIGITAL to OFF.)

•This will only allow 2-channel DVD sound to be listened to on the amplifier.

– 11 – EN

0C28