Sylvania SRZ3000 Glossary and AcronymsSpecifications

Product

STB for ATSC/NTSC

Connecting Jacks

ANT IN

F connector (75 ohm)

Video Output (component)

3-pin jack (Y, Pb, Pr)

S-Video Output

Mini DIN 4-pin jack (75 ohm)

Video Output

1-pin jack, 1Vpp

Analog Audio Output

2-pin jack (L, R)

450 mVrms (100k ohm)

Digital Audio Output

1-pin jack (Dolby Digital)

Power Source

120 VAC+/-10 %, 60 Hz+/-0.5 %

Power Consumption

25 W (Power on), Less than 1 W (Power off)

ENERGY STAR adopted.

Operating Condition

41 F°(5 C°) - 104 F°(40 C°)

Dimensions (W x H x D)

14-3/16"(W) x 2-15/16"(H) x 13(D)

(360 mm x 75 mm x 330 mm)

Weight

6.36 lbs. (2.89 Kg)

Designs and Specifications are Subject to change

without notice.

ATSC:

ATSC (Advanced Television Systems Committee) is

the group that has been working to establish the

standards for digital television broadcasting and

digital television equipment - including both SDTV

and HDTV.

Audio map:

Audio format and language outputs from a

broadcasting station are stored in an audio-map.

For example, when three language are available, the

sequence below will repeat and the desired audio

format and language can be set.

Audio output jack:

Audio output jack is located on the rear panel of STB

and send audio signal to other device connected by a

audio cable.

Autoscan:

AUTOSCAN is capable of receiving available

channels, both analog and digital, and storing those

channels in a channel map.

Channels once stored in a channel map can be

selected using CH o/ pbuttons.

Component video output jack (Y/ Pb/ Pr):

Component video output jack is located on the rear

panel of STB and provide superior picture to other

connections. And you can select the video resolution

by using the resolution selection switch.

Glossary and AcronymsSpecifications

100

EN

1A23

Appendix and Warranty

ST200.qxd 03.3.19 7:06 PM Page 100

Contents

Main INSTRUCCIONES EN ESPAOL INCLUIDAS. ATSC/NTSC STB SRZ3000 Table of Contents Indice 1 Before Using WARNING: TO RAIN OR MOISTURE. CAUTION IMPORTANT SAFEGUARDS Page AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE PRECAUTIONSPRECAUTIONS LOCATION Information on digital broadcasting Major features of STB 12 3 4 567 FRONT PANEL Location of controls Page Page Installing batteries Accessories Reference to SETUP menu ST200.qxd 03.3.19 7:05 PM Page 13 SETUP WIZARD guides you Language for screen (1/8) "Create new setup" "Keep old setup" Page Setting the clock (Daylight Savings Time) ST200.qxd 03.3.19 7:05 PM Page 15 Setting the clock (Time Zone) OFF CLOCK ( Refer to page 70, 71, 73, 75. ) ( Refer to page 71. ) ( Refer to page 73. ) ( Refer to page 75. ) DETAIL ( Refer to page 81. ) Setting for V-CHIP/CC ( Refer to page 82. ) ( Refer to page 84. ) Page Page Page Connections to other devices STB connection using COMPONENT video output to TV 2 Connections Page Page STB connection to a standard stereo system Page Page 2 Connections Page Page SETUP WIZARD 1 SETUP WIZARD will appear. 2 Select SETUP using Page 7 Select the desired time zone using 8 Enter YEAR, DATE and TIME using buttons. 9 Press ENTER when the cursor is on SET. 10 Select the desired channel to search from the channel map using navigation buttons. 11 Press ENTER. 12 Select the desired screen ratio using 13 Select the desired display mode using Page 4 Basic Operation 1 Turn the TV on and select the input to which the STB is connected to. 2 Turn the STB on. 3 Selecting a desired channel. 55-X 26-1 55-1 26-1 Page 1 Press INFO to display a channel banner. 2 Press INFO to clear. 26-1 Components of Channel Banner Choosing audio and language 1 Press AUDIO button. 77-1 1 Press STILL TV. 2 Press any button to quit. Picture Still 51-1 On screen messages 5 Advanced Operation Page 2 Select the desired program using 22-0 3 Press ENTER. Information icons EPG 1 / 31 (THU) 3 : 01PM Components of Electronic Program Guide (EPG) Page 1,6 2,3,5 Page 5 Select ADD using 6 Press SETUP to exit SETUP menu. 2 Select CHANNEL using 13-0 5 Select the digital channel number 26 using 6 Press ENTER when the cursor is on the digital channel 26. 7 Press SETUP to exit SETUP menu. 55-1 Page 2 Press SETUP to display SETUP menu. 3 Select CHANNEL using CHANNEL menu will appear. 4 Select ANTENNA using ANTENNA menu will appear, then STB starts 5 Adjust the antenna direction to get the best reception. 6 Press SETUP to exit SETUP menu. 2 Select CHANNEL using Page 5 AUTOSCAN is complete. 2-0 Page 3 Select SCREEN RATIO using Screen ratio options will appear. The screen ratio will be set. 4 Select the desired screen ratio using ppnavigation buttons, then press 2 Select DISPLAY using DISPLAYmenu will appear. 3 Select DISPLAY MODE,using navigation buttons , then press ENTER. Display mode options will appear. 4 Select the desired display mode using oo/ ppnavigation buttons, then press The display mode will be set. 5 Press SETUP to exit SETUP menu. Page 2 Select CLOCK using 1,6 2,3,4 Setting the clock Page 6 Select the desired time zone using pp/ ss/ BBnavigation buttons,then press The TIME ZONE will be set, then CLOCK menu will appear. 7 Select MANUAL using 8 Enter YEAR, DATE, and TIME using / buttons. Page 2 Select CLOCK using 3 Select AUTO using Auto clock setting menu will appear, then STB Channel search completed. will be indicated. will start searching for channels with clock data. When not using the auto-clock setting: Select OFF from the channel-map, then press 5 2,3,4 Setting a new password button, then press ENTER. 4 Enter the default password 0000. After entering the default password, V-CHIP/CC 5 Select NEW PASSWORD using Password setting menu will appear. 8 Press SETUP to exit SETUP menu. 6 Enter a new 4-digit password in the upper space, then enter again in the lower space to confirm. 7 V-CHIP/CC menu will appear. 2,3,4,5,6 2,3,5,6 Setting for V-CHIP/CC V-CHIP/CC password window will appear. 5 Select V-CHIP/CC using Page The MPAA(Motion Picture Association of America) uses the standard movie ratings. MPAA RATING 2,3,4,5,6 2,3,5,6 Setting MPAA rating Page * will appear for each digit. After entering the correct password, V-CHIP/CC 5 Select MPAA RATING using MPAArating setting menu will appear. Page TV RATING When you block a particular rating or content label, all categories above that will also be blocked. Setting TV rating Page After the correct password is entered, V-CHIP/CC 5 Select TV RATING using TV rating setting menu will appear. Content labels Age-based category Possible content labels INFORMATION on TV ratings Page Page After the correct password is entered, V-CHIP/CC 5 Select CC SELECTION using 6 Select the desired CC option using 7 Press SETUP to exit SETUP menu. Page Page 6 Appendix and Warranty Troubleshooting Page Glossary and AcronymsSpecifications 6 Appendix and Warranty Ubicacin de los controles Instalacin de las pilas 2 Instale dos pilas AA, asegurndose de que la polaridad (+ / -) de las mismas sea correcta. 3 Coloque la tapa del compartimiento de las pilas. Page Conexin del STB a un SDTV utilizando la salida VIDEO 1,2,3,6,7, 8,9,10,11, 12,13 1,2,3,6,7, 8,10,12, 13 Configuracin inicial 8