RECORDING FUNCTION
VCR
It may be UNLAWFUL to record copyrighted materi- al without the consent of the copyright owner.
Accidental Erasure Prevention
To prevent accidental recording on a recorded cassette, remove its record safety tab. To record on it later, cover the 
hole with cellophane tape.
Before recording, make sure:
¡The desired channel is selected by pressing Number on the remote control or CHANNEL (o/p). (If you connected the VCR to a cable box or satellite box as in "CONNECTING TO A TV WITHOUT A/V TER- MINALS" on page 13, select channel 3 on your TV, and select the specific INPUT channel assigned by your cable box or your satellite box on the DVD/VCR COMBINATION UNIT. Then, select the channel you want to record with the cable box or the satellite box. In this case, you can ONLY record and view the SAME channel.)
¡If noise appears, change the RF output channel of the VCR to channel 4 by pressing PLAY for 3 sec- onds during playback. Then select the same chan- nel (CH4) on your TV.
¡There is a tape with a safety tab in the VCR.
¡The desired recording speed is selected in SP (stan- dard play) or SLP (super long play) mode by press- ing SPEED on the remote control.
| Tape Speed |
| Recording/Playback Time | ||
| Type of tape | T60 |
| T120 | T160 |
| SP mode | 1 hour |
| 2 hours | |
| SLP mode | 3 hours |
| 6 hours | 8 hours |
Note
¡You can not copy a DVD to a videotape.
NORMAL RECORDING
VCR
1Begin the recording by pressing RECORD. The REC Light comes on.
¡To temporarily stop recording or to resume it, press PAUSE. After the VCR has been in Pause mode for 5 minutes, it will stop automatically to protect the tape and the video head from damage.
OTR (One Touch Recording)
VCR
This feature allows you to set the recording length sim- ply by pressing REC/OTR on the VCR.
1Press REC/OTR to begin OTR. The TIMER REC light comes on. Change the recording length by pressing REC/OTR repeatedly.
REC | OTR(0:30) | OTR(1:00) |
(Normal recording) |
|
|
OTR(8:00) 
OTR(7:30)
¡If a tape ends during OTR, the VCR will stop, eject the tape, and switch to the DVD mode automatically as the TIMER REC light blinks. (If the DVD power is off, the VCR will become STANDBY status).
¡When OTR is finished , the VCR turns off automat- ically. To use the VCR again, press
BINATION UNIT.
TIMER RECORDING
VCR
You may set the VCR to start recording while you are away. You can set eight programs to record on specif- ic days, daily or weekly within 1 year period.
If you have not yet set the clock, "CLOCK SET" appears. If so, follow the steps [3] and [4] in "CLOCK SET UP" section on page 17. Then, set the timer recording.
1Insert a tape with its safety tab into the
DVD/VCR COMBINATION UNIT.
2Select main menu by pressing MENU.
3 Select "TIMER PROGRAM- | TIMER PROGRAMMING | |
PROG | 12345678 | |
MING" by pressing K or L. | DATE | - |
Then, press B. The set up | START TIME | |
CHANNEL | ||
| END | TIME |
screen is displayed. | REC SPEED |
|
2Press STOP when the recording is completed.
Note
¡When you wish to watch another program while recording, select desired channel on your TV. If noise appears press VCR/TV.
¡This is not possible when using a cable box or satellite box.
4Set the timer.
¡To go back one step, press s.
1) Set the program number (1-8)
Program number which is not set up flashes. Press K or L repeatedly for the desired program number. Then, press B.
PROGRAM NUMBER 4 
DATE - 
END TIME -
CHANNEL - -
REC SPEED - -
– 19 – | EN |
1L25
