Sylvania SST4324S owner manual Preparation for USE, Operations

SLEEP 10

To cancel the sleep timer:

Press the SLEEP button repeated- ly until “SLEEP 0” is displayed.

PICTURE CHANNEL SET [ENGLISH]ESPAÑOL V-CHIP SET UP CAPTION [OFF]

TV SOUND [MAIN]

ADD/DELETE AUTO PRESET CH

PREPARATION FOR USE

LANGUAGE SELECTION

If you want to change the language of the on-screen menu, follow the procedure below.

1)	Connect the power cord to a standard AC outlet.
	Note: If some digits appear in the corner of the screen, press the POWER	PICTURE
	button without unplugging the power cord.	CHANNEL SET
		[ENGLISH]ESPAÑOL
2)	Press the POWER button to turn on the TV.	V-CHIP SET UP
		CAPTION [OFF]
3)	Press the MENU button so that the menu display appears
		TV SOUND [MAIN]
	on the TV screen.
4)	Press the CH(annel) ▲ or ▼ button to point to “[ENGLISH]”.	PICTURE
5)	Select “ENGLISH” or “ESPAÑOL” = Spanish by using	CHANNEL SET
		[ENGLISH]ESPAÑOL
	the VOL(ume) ▲ or ▼ button.
		V-CHIP SET UP
6)	Press the MENU button to exit the menu.	CAPTION [OFF]
		TV SOUND [MAIN]

3)Press the VOL(ume) ▲ button so that “ADD/DELETE” is selected.

4)Use the CH(annel) ▲ or ▼ button to select the channel you wish to put into memory or to erase from memory.

Note: The display will disappear automatically in about 10 seconds. Perform “ADD/DELETE” function while this display appears on the

screen.

●Press the VOL(ume) ▲ or ▼ button to light up the channel number in LIGHT BLUE if you wish to add the channel into memory.

●Press the VOL(ume) ▲ or ▼ button to light up the channel number

in LIGHT RED if you wish to erase the channel from memory.

5) Press the MENU button to exit the menu.

ADD/DELETE AUTO PRESET CH

CHANNEL PRESETTING

To preset a channel or to change a preset channel, follow the procedure below.

1)Press the POWER button to turn on the TV.

2)Press the MENU button so that the menu display appears

on the TV screen.

3) Press the CH(annel) ▲ or ▼ button to point to “CHANNEL SET”, then press the VOL(ume) ▲ button.

4) Press the CH(annel) ▲ or ▼ button to point to “AUTO PRESET CH”, then press the VOL(ume) ▲ button.

The tuner scans and memorizes all active channels in your area.

● The TV distinguishes between standard TV channels and cable (CATV) channels.

●When AUTO PRESET CH action is completed, the lowest memorized channel reappears on the screen.

●When you press the CH(annel) ▲ or ▼ button after selecting “AUTO PRESET CH”, the tuner will stop at the memorized channels only.

●The TV may memorize TV channels as CATV channels if the reception conditions are poor. If this happens, try AUTO PRESET CH action again when reception conditions are better.

●When AUTO PRESET CH is activated where there is no TV signal input, “NO TV SIGNALS” will appear on the display after the completion of channel scanning.

[ADD/DELETE FUNCTION]
1)	Press the MENU button so that the menu display appears on the TV	PICTURE
	screen.	CHANNEL SET
		[ENGLISH]ESPAÑOL
2)	Press the CH(annel) ▲ or ▼ button to point to “CHANNEL SET”, then	V-CHIP SET UP
		CAPTION [OFF]
	press the VOL(ume) ▲ button.
		TV SOUND [MAIN]

MTS (Multi-Channel Television Sound) System

You can listen to a program in MTS stereo by following the steps below.

Menu				To show the status, press the
Selection	MAIN	MONO	SAP	DISPLAY button on the remote
Type of
broadcast				control.
Regular	-None-	-None-	-None-
Stereo				SAP: Second Audio Program,
	STEREO	MONO	STEREO	which means your program, can
broadcast
				also be received in a second lan-
		MAIN
SAP	MAIN		SAP	guage or sometimes a radio station.

[To Select STEREO, MONO or SAP in Stereo broadcast]

1)Press the MENU button so that the menu display appears on the TV screen.

2)Press the CH(annel) ▲ or ▼ button to point to “TV SOUND”.

3)Press the VOL(ume) ▲ or ▼ button to select your desired stereo mode. ([MAIN], [MONO] or [SAP].)

: Press the VOL(ume) ▲ or ▼ button.

Menu
PICTURESelection	MAIN	PICTURE	SAP	PICTURE
CHANNEL SET		CHANNELMONOSET		CHANNEL SET
Type of		[ENGLISH]ESPAÑOL		[ENGLISH]ESPAÑOL
[ENGLISH]ESPAÑOL
broadcast		V-CHIP SET UP		V-CHIP SET UP
V-CHIP SET UP	-None-		-None-
Regular		-None-		CAPTION [OFF]
CAPTION [OFF]		CAPTION [OFF]
TV SOUND [MAIN]		TV SOUND [MONO]		TV SOUND [SAP]
Stereo	STEREO	MONO	STEREO
broadcast
SAP

RESUME FUNCTION

If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical- ly when the power resumes.

OPERATIONS

WATCHING A TV PROGRAM

1)Press the POWER button to turn on the TV.

2)Select the desired channel with the CH(annel) ▲ or ▼ button.

3)Adjust the volume to the desired listening level using the VOL(ume) ▲ or ▼ button.

4)Adjust picture controls for a natural looking image. (See PICTURE ADJUSTMENT.)

: Press the CH(annel) ▲ or ▼ button.

MANUAL SPORT NEWS MOVIE GAME

SETTING THE SLEEP TIMER

The sleep timer function allows you to have the POWER automatically turn off after a set time period.

1)Press the POWER button to turn on the TV and press the SLEEP button on the remote control .

2) You may change the sleep time by pressing the SLEEP button on the remote control repeatedly. The timer can be set up to 90 minutes. Each time the SLEEP button is pressed, the time ncreases by 10 minutes. (The timer dis- play counts up and sleep timer will be displayed on the screen when you press the SLEEP button on remote con- trol.)

Note: When you disconnect the unit from the AC outlet or when you have a power failure, the sleep time will be lost.

PICTURE ADJUSTMENT

1)Press the MENU button so that the menu dis- play appears on the TV screen.

2)Press the VOL(ume) ▲ button so that “PIC- TURE” is selected.

3)Press the CH(annel) ▲ or ▼ button to select “MANUAL”, then press the VOL(ume) ▲ but- ton.

4)Select the feature you wish to adjust with the CH(annel) ▲ or ▼ button and adjust it with the VOL(ume) ▲ or ▼ button.

: Press the CH(annel) ▲ or ▼ button.

	VOL(ume)	VOL(ume)
BRIGHT	to decrease	to increase
	brightness	brightness
CONTRAST	to decrease	to increase
	contrast	contrast
COLOR	to pale	to brilliant
TINT	to purple	to green
SHARPNESS	to soft	to clear

CLOSED CAPTION SELECTION

You may view specially labeled (cc) TV pro-			1) Press the MENU button so that the menu
grams, movies, news and prerecorded tapes,			display appears on the TV screen.
etc. with either a dialogue caption or text dis-			2) Press the CH(annel) ▲ or ▼ button to point
play added to the program.			to “CAPTION”.
			3) Press the VOL(ume) ▲ or ▼ button to select
			the mode you wish.
: Press the VOL(ume) ▲ or ▼ button.			4) When done, press the MENU button to exit
			the menu.
PICTURE	PICTURE	PICTURE
				PICTURE	PICTURE
CHANNEL SET	CHANNEL SET	CHANNEL SET		CHANNEL SET	CHANNEL SET
[ENGLISH]ESPAÑOL	[ENGLISH]ESPAÑOL	[ENGLISH]ESPAÑOL		[ENGLISH]ESPAÑOL	[ENGLISH]ESPAÑOL
V-CHIP SET UP	V-CHIP SET UP	V-CHIP SET UP		V-CHIP SET UP	V-CHIP SET UP
CAPTION [OFF]	CAPTION [ C1]	CAPTION [ C2]		CAPTION [ T1]	CAPTION [ T2]
TV SOUND [MAIN]	TV SOUND [MAIN]	TV SOUND [MAIN]		TV SOUND [MAIN]	TV SOUND [MAIN]

AV MEMORY

This feature allows you to expand your viewing experience select MANUAL, SPORT, NEWS, MOVIE and GAME to match the program you are watching.

1)Press the MENU button so that the menu display appears on the TV screen.

2)Press the VOL(ume) ▲ button so that “PICTURE” is selected.

3)Select the item with the CH(annel) ▲ or ▼ button.

Note: See PICTURE ADJUSTMENT to manually customize the picture.

[-] BRIGHT [+] [-]CONTRAST [+] [-] COLOR [+] [-] TINT [+] [-]SHARPNESS [+]

Note:

●In the above steps, the picture adjustment display will disappear from the TV screen automati-

cally after about 10 seconds if you do not press any buttons. Press the MENU and VOL(ume) ▲ button so that “PICTURE” is selected. Then press the CH(annel) ▲ or ▼ button repeatedly until the display returns to the screen.

[USING THE GAME BUTTON]

You can set Game mode and front AUDIO/VIDEO input mode at the same time by pressing the GAME button on the remote control. “GAME” appears on the TV screen.

●To exit Game mode and front A/V input, press the INPUT SELECT button.

●To cancel the Game mode only, follow the steps in PICTURE ADJUSTMENT. Game mode will be set to [OFF] automatically and “VIDEO2” (front AUDIO/VIDEO input mode) instead of “GAME” appears on the TV screen.

●If you press the GAME button when the TV is off, the TV turns on and will be in Game mode and will select front A/V input automatically.

V-CHIP SET UP

V-CHIP enables parents to prevent their children from watching inappropriate material on TV. V-CHIP reads the ratings for programming (except for news and sports programs, unedited movies on premium cable channels and Emergency Broadcast System signals), then denies access to programming if the program's rating meets or exceeds the limitations you select. In this case, “PROTECTED PROGRAM by ...” message appears on the TV screen.

To block certain ratings, follow the steps below.