1. Press the Voice Mail/Menu button to enter the menu.
2. Press the 0 button or press the SCROLL DOWN button 10 time to go to the
MESSAGE WAITING programming option. “MSG WAITING ON” will display
in LCD
Total
11
MSG WAITING
ON
10
#Total
11
MSG WAITING
ON
10
#
3. Press the Flash/Edit button to reset the Message Waiting Indication. “MSG
WAITING OFF” will be displayed in LCD and the “OFF” will flashing.
4. Press and hold the Re/Pa/Save button to delete the indication. A long “beep”
will sound to confirm the setting has been saved.
5. Continue with programming or press the Dir/Esc button to return to
STANDBY mode.
NOTE: Only Message Waiting in “ON” mode can delete the indication to “OFF” mode, if
the mode is “OFF”, no need this operation..
1. Press the Voice Mail/Menu button to enter the menu.
2. Press the * button or press the SCROLL DOWN button 11 time to go to the AREA
CODE programming option.
3. Press the Flash/Edit button to change the setting. “000” will begin flashing.
4. Press the TELEPHONE KEYPAD 0 to 9 buttons to enter the three digit area
code for your phone number.
5. When the desired setting is displayed, press and hold the Re/Pa/Save button
to save the setting. A long “beep” will sound to confirm the setting has been
saved.
6. Press the Dir/Esc button to return to STANDBY mode.
NOTE:
Do not use the AREA CODE programming if you are required to dial 10 digits
(XXX-XXX-XXXX) to dial a local number.
Caller ID System Operation
28