Sylvania Performance Guide, Specifications, Control Information, System Life / Warranty, WE T8

Installation Notes

	SPECIFICATION DATA
	Catalog #			Date				Type
	Project			Prepared by
	Comments
	High Efficiency Electronic T8 Fluorescent Controllable Lighting Systems
			Input	Input		Rated		Ballast	Initial	Input	System
	Item		Voltage	Current	Lamp	Lumens	No. of	Factor	System	Power	Efficacy
	Number	Description	(VAC)	(AMPS)	Type	(lm)	Lamps	(BF)	Lumens	(Watts)	(lm/W)	BEF1
	50705	QTP 1x32T8/UNV DIM-TC	120-277	0.27/0.12	FO32XP	3000	1	0.88	2640	30	88	2.93
S E								0.05	150	8
	50707	QTP 2x32T8/UNV DIM-TC	120-277	0.54/0.24	FO32XP	3000	2	0.88	5280	59/57	89/93	1.54
RS E N DIM
								0.05	300	14
	50714	QTP 3x32T8/UNV DIM-TCL	120-277	0.73/0.30	FO32XP	3000	3	0.88	7920	87/84	91/94	1.05
WE T8								0.05	450	20
	50716	QTP 4x32T8/UNV DIM-TCL	120-277	0.96/0.40	FO32XP	3000	4	0.88	10560	114/110	92/96	0.80
P O
								0.05	600	27

Products are all 10-pack. 1: Ballast Efficiency Factor (BEF) shown = (Ballast Factor x 100) divided by Input Power (note: calculation based on lowest wattage value)

T8 POWERSENSE®

High Efficiency

Performance Guide

Data based on SYLVANIA OCTRON® lamps shown. QUICKTRONIC® POWERSENSE ballasts are also compatible with other manufacturers equivalent lamp types that meet ANSI specifications, including F17, F25, F32 and the U-Bend equivalent lamps.

Specifications

Data based on F32T8

Starting Method: Programmed Rapid Start

Circuit Type: Series

Lamp Frequency: >40 kHz

Lamp CCF: Less than 1.7

Starting Temp: 50°F/10°C minimum for OCTRON T8 lamps

Dimensions:

1 & 2 lamp enclosure

Overall: 9.5" L x 1.68" W x 1.0" H (241 x 43 x 25 mm)

Mounting: 8.90" (226 mm)

Weight: 1.1 lbs each (500 g)

3 & 4 lamp enclosure

Overall: 16.7" L x 1.68" W x 1.0" H (425 x 43 x 25 mm) Mounting:16.2" (411 mm)

Weight: 2.1 lbs each (950 g)

Wiring:
Leads Only		Width
		43mm
		(1.68")
Height	Mounting
	Length
8.70 mm
Slot	Length
Width
	Mounting
Height	411.3mm
	(16.2")	Length
25.4mm
(1.0")		425mm
		(16.7")

Input Voltage: 120-277V, ±10%

Input Frequency: 50/60 Hz

THD: <10% @ Full Output

Power Factor: >98% @ Full Output UL Listed Class P, Type 1 Outdoor CSA or C/UL Certified

70°C Max Case Temperature

FCC 47CFR Part 18 Non-Consumer Class A Sound Rating

ANSI C62.41 Cat. A Transient Protection Remote mounting (Max. wire length from ballast case to lampholder) up to 8 feet

Output Wiring: Lamp wiring for dimming ballasts can differ significantly from non-dimming ballasts and from other manufacturers dimming ballasts. Take care to connect lamp lead wires as

shown on the applicable ballast diagram. Lamp Seasoning: For optimal performance, fluorescent lamps may require seasoning for up to 12

hours prior to low temperature starting & low level dimming. Refer to NEMA LSD 23-2002 Lighting Systems Division: Recommended Practice — Lamp Seasoning for Fluorescent Dimming Systems

Control Information

QUICKTRONIC POWERSENSE ballasts are compatible with a wide range of low voltage (0-

1 lamp

Black	Red
White	Red

	ELECTRONIC
Violet (+)	BALLAST	Blue
Grey (-)		Blue

LAMP 1

2 lamp
	Black			Red
	White			Red
		ELECTRONIC		Blue
		BALLAST		Blue
	Violet (+)			Yel/Blk
	Grey (-)			Yellow
				Yellow
		LAMP 1
		LAMP 2
			Red

10VDC) and power line fluorescent controllers available from various manufacturers.

Low Voltage Control Specs: Ballast will source up to 0.5mA for 0-10VDC control purposes. May be wired as a Class 1 or Class 2 circuit- consult Local and National Electrical Codes. Power Line Control Specs: Specification- grade fluorescent controls are available for 120V or 277V operation of controllable analog electronic fluorescent ballasts.

3 lamp

Black

White

Violet (+)

Grey (-)

ELECTRONIC

BALLAST

Red

Red/White

Red/Black

Red/White

Yellow

Yel/Blk

Yellow

Blue

LAMP 1

LAMP 2

LAMP 3

4 lamp			Red/White
			Red/Black
	Black		Red/White
	White	ELECTRONIC	Yellow
		BALLAST	Yellow/Black
	Violet (+)		Yellow
Grey (-)			Blue/White
			Blue/Black
			Blue/White

LAMP 1

LAMP 2

LAMP 3

LAMP 4

Controls must be suitably rated for both the type (e.g. Fluorescent Phasecontrol) and size (e.g. 600W) of the connected load.

System Life / Warranty

SYLVANIA

					Blue
Input & Control
Wiring Options:	LOW-VOLTAGE CONTROL			POWERLINE CONTROL
	LINE		BLACK	LINE	BLACK
	NEUTRAL		WHITE	NEUTRAL	WHITE
	Class 1 or	0-10VDC	VIOLET (+)		VIOLET (+)
	Class 2	< 0.5mA	GREY (-)	INSULATE
					GREY (-)
				UNUSED LEADS

Item Number	50707 QTP 2 x 32T8 / UNV DIM-TC	System Type - DIMMING/Case Size
QUICKTRONIC PROFESSIONAL		Line Voltage (120-277V)
Number of Lamps (1, 2, 3, 4)		Primary Lamp Wattage

QUICKTRONIC products are covered by QUICK 60+®, a comprehensive lamp and ballast system warranty. For additional details, refer to the QUICK 60+ warranty bulletin.

OSRAM SYLVANIA

National Customer

Service and Sales Center

1-800-LIGHTBULB (1-800-544-4828) www.sylvania.com

Specifications subject to change without notice.

©2010 OSRAM

SYLVANIA, the system solution, QUICK60+, POWERSENSE, See the World in a New Light and PROStart are registered trademarks of OSRAM SYLVANIA Inc.

ELOGIC is a trademark of OSRAM SYLVANIA Inc. QUICKTRONIC is a registered trademark of OSRAM GmbH. NEMA Premium is a registered trademark of National Electrical Manufacturers Association.