Symbologies 13-13
Decode UPC/EAN/JAN SupplementalsParameter # 10h
Supplementals are bar codes appended according to specific format conventions (e.g., UPC A+2, UPC E+2, EAN 13+2). Six options are
available.
•If Decode UPC/EAN/JAN Only With Supplementals is selected, UPC/EAN/JAN symbols without supplementals are not
decoded.
•If Ignore Supplementals is se lected, and the digital scanner is presented with a UPC/EAN/JAN with a
supplemental, the UPC/EAN/JAN is decoded and the supplemental bar code is ignored.
•An Autodiscriminate Option is also available. If this option is selected, choose an appropriate UPC/EAN/JAN
Supplemental Redundancy value from the next page. A value of 5 or more is recommended.
Enable 378/379 Supplemental Mode to delay only EAN-13/JAN-13 bar codes starting with a ‘378’ or ‘379’ prefix by the
supplemental search process. All other UPC/EAN/JAN bar codes are exempt from the search and are reported instantly upon
decode.
Select Enable 978 Supplemental Mode to delay only EAN-13/JAN-13 bar codes starting with a ‘978’ prefix by the
supplemental search process. All other UPC/EAN/JAN bar codes are exempt from the search and are reported instantly upon
decode.
Select Enable Smart Supplemental Mode to delay only EAN-13/JAN-13 bar codes starting with a ‘378’, ‘379’, or ‘978’
prefix by the supplemental search process. All other UPC/EAN/JAN bar codes are exempt from the search and are reported
instantly upon decode.
To minimize the risk of invalid data transmission, select either to decode or ignore supplemental characters.
Decode UPC/EAN/JAN Only With Supplementals
(01h)
*Ignore Supplementals
(00h)
Autodiscriminate UPC/EAN/JAN Supplementals
(02h)
Note