Scanner Emulation Interface 11-5
Scanner Emulation Host
Scan the bar code below to enable the Scanner Emulation host.

Scanner Emulation Host Parameters

Beep Style

The Scanner Emulation host supports three beep styles.
Beep On Successful Transmit: The digital scanner beeps when the attached decoder issues the decode signal to the
digital scanner, so the digital scanner and the attached decoder beep at the same time.
Beep At Decode Time: The digital scanner beeps upon decode. This results in a double beep sequence from most
decoders, since the digital scanner beeps, and the decoder beeps (at a different frequency) when it successfully decodes the
output.
Do Not Beep: Only the attached decoder issues the decode beep.
In all cases, if an error occurs, the digital scanner issues error beeps.
Scanner Emulation Host
*Beep On Successful Transmit
Beep At Decode Time
Do Not Beep