Miscellaneous Scanner Options 13-5
Miscellaneous Scanner Parameters

Transmit Code ID Character

A Code ID character identifies the code type of a scanned bar code. This may be useful when the scanner is decoding more than one
code type. In addition to any single character prefix already selected, the Code ID character is inserted between the prefix and the
decoded symbol.
Select no Code ID character, a Symbol Code ID character, or an AIM Code ID character. For Code ID Characters, see Symbol Code
Identifiers on page B-3 and AIM Code Identifiers on page B-4.

Prefix/Suffix Values

A prefix and/or one or two suffixes can be appended to scan data for use in data editing. To set a value for a prefix or suffix, scan a
four-digit number (i.e., four bar codes from Appendix D, Numeric Bar Codes) that corresponds to that value. See Table E-1 on page E-
1 for the four-digit codes.
When using host commands to set the prefix or suffix, set the key category parameter to 1, then set the 3-digit decimal value. See
Table E-1 on page E-1 for the four-digit codes.
To correct an error or change a selection, scan Cancel on page D-4.
To use Prefix/Suffix values, first set the Scan Data Transmission Format on page 13-6.
Symbol Code ID Character
AIM Code ID Character
*None