3-8

P 300 STD/FZY/PRO Scanner Product Reference Guide
Beeper Definitions for ADF

The following table defines beep sequences that occur during rule entry.

Table 3-3. Beeper Definitions

Beeper Sequence Indication
Normal Data Entry. Duration of tones are short.
High-Low Entry of a number is expected. Enter another digit. Add leading zeros
to the front if necessary.
Low-Low E ntry of an alphabetic character is expected. Enter another character
or scan the End of Message bar code.
High-High Entry of Criterion/Action is expected. Enter another criterion or
action, or scan the Save Rule bar code.
High-Low-High-Low Rule saved. Rule entry mode exited.
High-Low-Low All criteria or actions were cleared for rule currently being entered;
continue entry of rule.
Low Last saved rule was successfully deleted. The rule presently being
entered is left intact.
Low-High-High All rules are now deleted. The rule presently being entered is left
intact. (This beep sequence has a different meaning outside of ADF.)
Error Indications. Duration of tones are very long.
Low-High-Low-High Out of rule memory. Erase some existing rules, then try to save rule
again. (The current rule need not be re-entered.)
Low-High-Low Cancel rule entry. Rule entry mode e xited because of an error or the
user asked to exit rule entry.
Low-High Entry error, wrong bar code scanned. Re-enter criterion or action. All
previously entered criteria and actions are retained. Criteria or action
list is too long for a rule.